Setting The Time - iHome iBT21 Instruction Manual

Setting the Time

1. Press and hold the Clock Adjust Button (located on the back of the unit) until the time flashes in the
display and a beep sounds.
2. Press and release the – or + Buttons to adjust the clock to the current time (hold to advance or reverse
rapidly). Make sure to set the correct AM/PM time. The PM indicator appears to the left of the time
display; there is no AM indicator.
3. Press and release the Clock Adjust Button. The year will flash on the display.
4. Press and release the – or + Buttons until the current year is displayed (hold to advance or reverse
rapidly).
5. Press and release the Clock Adjust Button again. The date will flash on the display.
6. Press and release the – or + Buttons until the current date is displayed (hold to advance or reverse
rapidly).
7. Press and release the Clock Adjust Button again to complete time setting. You will hear 2 beeps to
confirm time setting is complete.
NOTE: Press the or
12 hour display and 24 hour ("military") display modes.
Button at any time during time setting to
Using the
toggle between standard
5
iBT21