Front Fog Light (If Equipped) - Subaru Legacy Outback 2006 Owner's Manual

Low beam light bulbs
1. Remove the bulb cover, by turning it
counterclockwise.
2. Disconnect the electrical connector.
3. Remove the retainer spring.
4. Replace the bulb, then set the retainer
spring securely.
5. Reconnect the electrical connector.
6. Install the bulb cover.
High beam light bulbs
700067
1. Disconnect the electrical connector
from the bulb.
2. Remove the bulb from the headlight
assembly by turning it counterclockwise.
3. Replace the bulb with new one.
4. Reconnect the electrical connector. At
this time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight as-
sembly, turn it clockwise until it clicks.
700068
Maintenance and service
Front position light
It may be difficult to replace the bulbs. We
recommend that you have your SUBARU
dealer replace the bulbs if necessary.
Front turn signal light
It may be difficult to replace the bulbs. We
recommend that you have your SUBARU
dealer replace the bulbs if necessary.

Front fog light (if equipped)

It may be difficult to replace the bulbs. We
recommend that you have your SUBARU
dealer replace the bulbs if necessary.
700069
11-59
– CONTINUED –