Built-In Cd Changer Operation - Subaru Legacy Outback 2006 Owner's Manual

Repeat button (RPT)
RPT
Push the "RPT" button to repeat the track
of music being listened to. To use this
function, push the "RPT" button while the
track you want to hear again is being
played. "RPT" will be indicated on the dis-
play.
When the track ends, the cassette player
will automatically rewind to the beginning
of the track and play the track again.
To cancel the repeat mode, press the
"RPT" button again.
Dolby B NR button (B NR)
500051
Press the "B NR" button when playing
tapes recorded using the Dolby NR sys-
tem*. The "B NR" indicator will light up,
and high-frequency noise on the tape will
be reduced for clearer sound reproduc-
tion.
*: Noise reduction system manufactured under
license from Dolby Laboratories Licensing Cor-
poration. "Dolby" and the double-D Symbol are
trademarks of Dolby Laboratories Licensing
Corporation.
Auto metal sensor
The cassette player automatically adjusts
for metal tape and for CrO
Auto reverse
When the system detects the end of a
tape that is being played, it automatically
starts playing the other side of the tape.
NOTE
1
side up. If you insert a disc with the la-
bel side down, the display will show
"ERROR04".
B NR
dle only 12 cm/5 inch CDs. Do not at-
500059
tempt to use an 8 cm/3 inch CD. Doing
so could cause damage.
able to play music CD-Rs and CD-RWs.
However, unsuitable recording proper-
ties,
scratches, dirt, and other factors may
render it unable to play certain discs of
these types.
Also, the CD changer cannot play any
CD-R or CD-RW that has not been final-
ized (processed for playability in a nor-
mal CD player).
ROMs and MP3 CDs.
tape.
2
text.
Audio
Built-in CD changer opera-
tion
Be sure to insert discs with the label
The CD changer is designed to han-
The CD changer is designed to be
unsuitable disc properties,
The CD changer cannot play CD-
The CD changer cannot display CD
– CONTINUED –
5-45