Subaru Legacy Outback 2006 Owner's Manual page 63

1-38
Seat, seatbelt and SRS airbags
2. Open the cover flaps to use the an-
chorages.
3. Attach the child restraint attaching clip
to the appropriate anchor fitting.
4. Tighten the upper anchorage strap se-
curely.
Please contact your SUBARU dealer if
you have any question regarding the in-
stallation of a child restraint system.
TOP TETHER
Always remove the head restraint
when mounting a child restraint sys-
tem with an upper anchorage strap.
Otherwise, it may happen that the
upper anchorage strap cannot be
fastened tightly.
200309
Station wagon
1. Remove the head restraint at the seat-
200310
ing position where the child restraint sys-
tem has been installed with the ISOFIX
anchor bars or seatbelt; lift up the head re-
straint while pressing the release button.
Store the head restraint in the cargo area.
Avoid placing the head restraint in the
passenger compartment to prevent it from
being thrown around in the passenger
compartment in a sudden stop or a sharp
turn.
2. Open the cover flaps to use the an-
chorages. Fasten the top tether hook of
the child restraint system to the appropri-
ate top tether anchorage.
100270
100271