Subaru Legacy Outback 2006 Owner's Manual page 175

5-8
Audio
Press the "BAND" button to select the de-
sired waveband. Each time you press the
button, the waveband will change to the
next one in the following sequence. The
selected waveband will be shown on the
display.
MW
FM1
Stereo indicator
The display shows the stereo indicator
"ST" when an FM stereo broadcast is re-
ceived.
Manual tuning (TUNE)
TUNE
TRACK
Push the tuning button marked "
crease the tuning frequency, and press
the tuning button marked "
crease it.
Each time the button is pressed, the fre-
quency changes 0.05 MHz in the FM
mode, 9 kHz in the MW mode and 1 kHz
in the LW mode.
Constant pressure on the button causes a
continuous change in the frequency.
LW
Seek tuning (SEEK)
Push the tuning button for at least a
half second.
The radio will seek the next available sta-
tion and stop on it. Repeat this operation
until you find the desired station.
Selecting preset stations
1 2
500049
Presetting a station with a preset button
" to in-
allows you to later select that station in a
single operation. Up to six FM1, FM2,
" to de-
3 4 5 6
500050
FM3, MW and LW stations each can be
preset.
How to preset stations
Manual preset
1. Press the "BAND" selection button to
select FM1, FM2, FM3, MW or LW recep-
tion.
0
500048