Subaru Legacy Outback 2006 Owner's Manual page 240

How to insert a CD
Inserting a CD
TONE BAL
1. Briefly press the "LOAD" button. On the
display, the disc number assigned to the
disc you are going to insert and the
"LOAD" indicator will blink.
2. As soon as the "LOAD" indicator be-
gins to blink, insert the disc. The disc will
be automatically drawn in, and the player
will begin to play back the first track on the
disc.
The disc indicator steadily lights up if a
disc is already inserted in the correspond-
ing position in the magazine.
If you press either of the other mode
buttons ("FM" or "AM") while the player is
in the loading mode, the player will enter
the standby mode. Press the "DISC" but-
ton to start playback.
To insert multiple CDs one after an-
0
other
LOAD
500084
1. Press the "LOAD" button for 1 second
or longer. You will hear a bleep.
2. The display will show "ALL LOAD".
3. Insert the CDs one at a time.
4. Playback will begin with the CD that
was inserted first.
NOTE
If you do not insert a disc in the 15-sec-
ond period after the appearance of the
"LOAD" or "ALL LOAD" indication, the
player will return to the mode in which
it was operating just before the
"LOAD" button was pressed.
0
LOAD
TONE BAL
500084
Inserting a disc in a desired position
TONE BAL
1. Briefly press the "LOAD" button. If the
magazine in the player has an empty po-
sition where you can insert a disc, the disc
number corresponding to the empty posi-
tion will blink. Any position whose indica-
tor is steadily illuminated already contains
a disc.
– CONTINUED –
5-73
Audio
0
LOAD
500084