5. Open the air cleaner case cover and
remove the air cleaner element.
6. Clean the inside of the air cleaner case
cover and case with a damp cloth and in-
stall a new air cleaner element.
7. To install the air cleaner case cover, in-
sert the three projections on the air clean-
er case cover into the slits on the air clean-
er case and then snap the two clamps on
the air cleaner case cover.
Turbo models
B00114
1. Use a screwdriver to undo the clips on
the air intake duct, then remove the air in-
take duct.
B00115
Maintenance and service
0
2. Unplug the connector that is attached
to the top of the air cleaner case.
B00116
3. Use a screwdriver to remove the duct
that is connected to the air cleaner case
cover.
11-27
B00206
B00207
– CONTINUED –