Level 2 Programming; Advanced Product Settings - Henny Penny LVE-102 Operator's Manual

5-1. ADVANCED PRODUCT
SETTINGS
1207
SECTION 5. LEVEL 2 PROGRAMMING
Used to access the following:
• Advanced changes to product settings
• Error code log
• Password programming
• Alert Tone/Volume
• No. of cook cycles before filter is suggested
• Automatic filter time
1. Press and hold
in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press right √ √ √ √ √ button and 'SELECT PRODUCT' and "-P 1-"
show in the displays.
4. Use the
or press the desired product button
5. Press right √ √ √ √ √ button and the product (ex: NUGGETS) shows in
the left display and "MODIFY" "YES NO" shows in the right
display. Press the √ √ √ √ √ button to change this product, or press the
X button to choose another product.
>Load Compensation, Load Compensation
Reference, Full Heat, PC Factor<
6. If √ √ √ √ √ button was pressed, "LD COMP" shows in the display
along with the load compensation value. This automatically
adjusts the time to account for the size and temperature of the
cooking load.
Press the product buttons
to change this value of 0 to 20.
7. Press
along with the load compensation average temperature. (if
load compensation is set to "OFF", then "_ _ _" shows in
display and setting cannot be programmed) This is the average
cooking temperature for each product. The timer speeds up at
temperatures above this setting and slows down at temperatures
below this setting. Press the product buttons
and buttons until LEVEL - 2 shows
and buttons to scroll through the 40 products,
button until "LCMP REF" shows in the display
to change this value.
Model LVE-102, 103, 104
5-1