Henny Penny LVE-102 Operator's Manual page 43

4-3. DEEP CLEAN MODE
(Continued)
108
5. Split vat fryers only! Display shows "LEFT RGHT", asking
you to select which vat will be cleaned. Press √ √ √ √ √ button to select
left vat, or X button for the right vat.
6. Display shows "OIL RMVD" "YES NO"
7. If oil has already been removed, press √ √ √ √ √ button and control
skips down to "Solution Added?" step.
If vat still has oil, press X button and display shows "DISPOSE"
"YES NO". Press √ √ √ √ √ button dispose of the oil, or press X button
to exit Deep Clean Mode.
JIB systems only! Display shows "IS DISPOSAL UNIT IN
PLACE?" "YES NO". If "NO" is selected, display shows
"INSERT DISPOSAL UNIT". Once disposal unit is in place
press √ √ √ √ √ button for YES and display shows "DISPOSING" and
oil drains from vat.
Bulk systems only! Display shows "CHK PAN" "YES NO"
if the filter drain pan is missing. Once pan is in place press √ √ √ √ √
button for YES, display shows "DISPOSING" and oil drains
from vat. Once frypot is empty, open the door that has the RTI
switch (at left) and press the "DISPOSE" button on the RTI
switch until drain pan is empty.
Display then shows "VAT EMTY", "YES NO". Press √ √ √ √ √ button
when ready and display shows "CLN VAT COMPLETE"
"YES NO". Once the vat has been cleaned, press √ √ √ √ √ button and
drain valve closes.
8. Display shows "SOLUTION ADDED?" "YES NO". Mix McD
Heavy-Duty Degreaser Solution in the vat to be cleaned and fill
vat to 1 in. (25 mm) above the top fill line. Then press √ √ √ √ √ button
and display shows "START CLEAN" "YES NO"
9. Press √ √ √ √ √ button display shows "CLEANING", and a countdown
timer. Heat regulates to 195°F (91°C) for this step for one hour.
Add water as needed during cleaning process to keep solution
1 in. (25 mm) above the top fill line.
To stop the cleaning cycle early, press X button. The display
shows "QUIT DEEP CLEAN?" "YES NO". Press the √ √ √ √ √
button to cancel the rest of the countdown time and proceed to
the rinse steps.
Model LVE-102, 103, 104
4-5