Adjusting The Lcd Monitor And Viewfinder; Adjusting The Lcd Monitor - JVC GY-HM600E Instructions Manual

Adjusting the LCD Monitor

and Viewfinder
You can monitor video images on this camera
recorder using the viewfinder, LCD monitor, or
both.
Normal LCD
Inverted
LCD
Displays on the LCD Monitor and
Viewfinder Screen (VF)
When [LCD/VF] B [LCD + VF] is set to "Off"
(A P101 [ LCD + VF ] )
LCD Monitor Status
LCD closed Normal LCD OFF
Inverted LCD ON
LCD opened Normal LCD ON
Inverted LCD ON
* Turns on when [LCD/VF] B [LCD + VF] is set to
"On".
Memo :
Press and hold the [DISPLAY] button for 2 seconds
0
to turn ON/OFF the LCD monitor.
The function to switch between LCD monitor and
0
viewfinder displays by pressing the [DISPLAY]
button can be canceled by opening/closing or
rotating the LCD monitor.
The viewfinder screen is always displayed when
0
[LCD/VF] B [LCD + VF] is set to "On".
You can display both the LCD monitor and
0
viewfinder screens at the same time by setting
[LCD/VF] B [LCD + VF] to "On".
(A P101 [ LCD + VF ] )
36
DISPLAY
LCD Display VF Display
ON
OFF *
OFF *
OFF *
Adjusting the LCD Monitor
Tilt 90 degrees
2 downward
Tilt 180 degrees
1
upward
1 Open the LCD cover.
2 Incline the LCD cover to a position that
enables easy viewing.
Rotate the LCD monitor to adjust the angle.
While the LCD monitor is open, you can
0
rotate it 180 degrees upward or 90 degrees
downward.
Rotating the LCD monitor 180 degrees
0
upward enables you to see the screen from
the lens side. To display the image when it is
viewed from the opposite direction (mirror
image), perform setting as follows.
Set [Main Menu] B [LCD/VF] B [LCD
Mirror] to "Mirror" B Set button (R)
(A P102 [ LCD Mirror ] )
3 Adjust the brightness, contour, and
contrast of the LCD monitor.
You can change the angle and brightness of the
LCD monitor according to your usage condition.
Changing the brightness of the screen will not
affect the recorded images.
Adjusting the Brightness
Use the [LCD BRIGHT +/－] button to adjust the
brightness of the LCD monitor.
The [+] button brightens the monitor and the
0
[－] button darkens it.
Press the [+] and [－] buttons simultaneously
0
to return to standard settings.
During adjustment, the brightness level is
0
displayed on the LCD monitor.
LCD BRIGHT
4030 20 10 0
3
LCD BRIGHT PEAKING
ND 1 /64
-10 AE 6
+
0
dB
F1.6
P 13000K 1/ 100