Commissioning
5.1
Start up
1. With the SITRANS LU150 correctly installed (or aimed at a wall 0.25 to 5 m away), apply
power.
The device starts up, displaying the following:
①
②
③
④
2. It then defaults to the Run mode, which is the measurement reading of the distance from
the transducer face to the material level in the units indicated as shown:
3. If the default display differs from that shown, refer to SITRANS LU150.
16
'4' key
'20' key
Program mode
Alphanumeric
⑤
Units
⑥
LOE/fault
⑦
Operation status
Operating Instructions, 10/2021, A5E34590123-AC
5
SITRANS LU150