Advertisement
GUIDELINES FOR USER SAFETY AND EQUIPMENT PROTECTION
This manual is intended to aid trained and competent personnel in the installation of this equipment. Only a technician or
engineer trained in the local and national electrical standards should perform tasks associated with the electrical wiring of
this device.
Warnings
▪
Under no circumstances will Environmental Monitor Service, Inc. be liable or responsible for any consequential
damage that may arise because of installation or use of this equipment.
▪
All examples and diagrams shown in the manual are intended to aid understanding. They do not guarantee
operation.
▪
Environmental Monitor Service, Inc. accepts no responsibility for actual use of this product based on these examples.
▪
Due to the great variety of possible applications for this equipment, the user must assess the suitability of this
product for specific applications.
▪
Make sure to have safety procedures in place to stop any connected equipment in a safe manner if the controller
should malfunction or become damaged for any reason.
▪
Do not replace electrical parts or try to repair this product in any way.
▪
Only qualified factory trained service personnel trained in its operation should open the device's housing or carry
out repairs.
▪
The manufacturer is not responsible for problems resulting from improper or irresponsible use of this device.
▪
You may cause an electric shock, fire or damage the equipment if you ignore any of these safety precautions. Section
1-Installation Electrical connections
NOTE: If using negative draft or plant air disregard blower and SW1&2 information.
3
Advertisement
