Straight-through twisted-pair cable for 1000 Mbps network
connections
1000BASE-T connections require that all four pairs or wires be connected.
Cable diagram
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B".
Pins 4 and 5 on connector "A" must be wired as a twisted pair to pins 4 and 5 on connector "B".
Pins 7 and 8 on connector "A" must be wired as a twisted pair to pins 7 and 8 on connector "B".
Aruba 6000 & 6100 Switch Series Installation and Getting Started Guide
47