Horizontal Surface Mounting; Wall Mounting 12G Switches - Aruba 6000 Series Installation And Getting Started Manual

Horizontal surface mounting

Place the switch on a table or other horizontal surface. The switch comes with rubber feet in the accessory
kit that can be used to help keep the switch from sliding on the surface.
Attach the rubber feet to the four corners on the bottom of the switch within the embossed angled lines.
Use a sturdy surface in an uncluttered area. You may want to secure the networking cables and switch
power cord to the table leg or other part of the surface structure to help prevent tripping over the cords.
Nothing should be placed on top of the switch. Adequate spacing on all sides needs to be maintained for
ventilation.
When mounting the switch on top of a surface, position the switch so that items (papers and other items) are not likely
to be put on top of it or next to it, blocking the ventilation holes.
For fanless models, attaching the four rubber feet to the bottom of the switch is required to provide the necessary
thermal transfer space between the switch bottom and the horizontal surface.

Wall mounting 12G switches

Aruba 6000 and 6100 12G airflow
Aruba 6000 & 6100 Switch Series Installation and Getting Started Guide 21