Registering A Unit - Panasonic KX-TGF370 Series Operating Instructions Manual

Programming
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 52).
Handset
1
MMENUN#104
2
Enter the desired name (10 characters
max.).
3
MSAVEN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
Handset
1
MMENUN#105
2
MbN: Select the desired setting. a
MSAVEN a MOFFN

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 4 for information on the available
model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
1
Handset:
MMENUN#130
2
Base unit:
Press and hold MLOCATORN for about 5
seconds.
For assistance, visit www.panasonic.ca/english/support
52
TG175CSK(en)_0324_ver011.pdf
3
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
Handset
1
2
3
52
R If all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step.
Handset:
Press MOKN, then wait until a long beep
sounds.
MMENUN#131
R All handsets registered to the base unit
are displayed.
MbN: Select the handset you want to
cancel. a MSELECTN
MbN: "Yes" a MSELECTN a MOFFN
2016/03/24 9:06:20