Panasonic KX-TGF370 Series Operating Instructions Manual page 61

R A long beep sounds.
2
MOFFN
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
Handset
1
MMENUN#612
2
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
display.
3
MOFFN
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
To answer a landline call, press your
headset's button referring to your headset
operating instructions.
When you finish talking, press your headset's
button referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
For assistance, visit www.panasonic.ca/english/support
TG175CSK(en)_0324_ver011.pdf
n To switch to your headset:
n To switch to the base unit:
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set
n While the handset is on a landline call:
n While your headset is on a landline call:
Adjusting your headset receiver
volume
Base unit
Press MDN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
61
Using Bluetooth® Devices
Press M N on the base unit.
Press MZN on the base unit.
privacy mode to off beforehand (page 45).
To join the conversation with your headset,
press your headset's button referring to
your headset operating instructions.
To join the conversation with the handset,
press M N.
volume may not be adjustable.
61
2016/03/24 9:06:21