Registering The Station Unit Using The Pin - Panasonic KX-TGA420B Operating Instructions Manual

Registering the Station Unit Using the PIN
If the PIN (Personal Identification Number) has been stored with the base
unit to prevent unauthorized persons from registering and using an
extension unit (station unit/cordless handset) (see page 52 in the
KX-TG4000B/KX-TG2000B Operating Instructions), you are required to
enter it at registration.
Only one unit can be registered at a time by using the base unit.
Make sure that the base unit and station unit are in the standby mode.
Registration must be completed within 1 minute.
J
Base unit:
Follow steps 1 to 4 on page 12.
2
Station unit:
Repeat the steps 5 to 7 on page 12.
3 Enter the PIN.
• If you enter the wrong PIN, press (CLEAR),
and enter the PIN again.
4 Press
(ENTER).
5 Base unit/station unit:
Wait until a beep sounds on the base unit
and station unit and until both of the
displays show the assigned extension
number.
Ex. Extension number is 2.
• To return to the standby mode, press
HDD.
• The extension number will be displayed on
the station unit.
Base Unit
Handset2
registered
Handset
registering
HS registration
Enter PIN:D-
ENTER=Set
HS registration
Enter PIN:123D
ENTER=Set
Station unit
Handset2
registered
Handset
regis tering
• If registered to KX-TG2000B, the [LINE 3) and [UNE 4) buttons on the station
unit will be inoperative.
r
L.
For assistance, please call: 1 -800-211 -PANA(7262)
13