Panasonic KX-TGF370 Series Operating Instructions Manual page 76

Useful Information
Problem
I cannot make or answer
cellular calls with the handset
or base unit.
I can make and answer cellular
calls but cannot hear a sound.
I cannot switch cellular calls
from the unit to the cellular
phone.
I cannot make a call using a
landline.
I cannot use a cellular line or a
landline.
I cannot make long distance
calls.
Call Display/Talking Call Display
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
For assistance, visit www.panasonic.ca/english/support
76
TG175CSK(en)_0324_ver011.pdf
Cause/solution
R Depending on the cellular phone's compatibility (page 4),
you may not be able to make or answer cellular calls even
if the cellular phone is connected to the base unit.
R Make sure that the CELL indicator lights up and the
cellular phone is connected to the base unit (page 18).
R Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
R The cellular phone is being used separately from your
system.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
R The dialing mode may be set incorrectly. Change the
setting (page 15).
R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular
line).
R Make sure that you have long distance service.
Cause/solution
R You must subscribe to Call Display service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Call Display box or cordless
telephone line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your phone service
provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may
display or announce the caller's information at the 2nd
ring or later.
R Move closer to the base unit.
76 2016/03/24 9:06:21