Panasonic KX-TGF370 Series Operating Instructions Manual page 64

Answering System for Landline
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Note:
R To switch to the receiver, press M
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
Operating the answering system
MMENUN a MbN: "Answering device" a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
2 or MEN Skip message (during
playback)
3 Enter the "Settings" menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MPAUSEN
Pause message
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
*3 Erase currently playing
*4
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
For assistance, visit www.panasonic.ca/english/support
64
TG175CSK(en)_0324_ver011.pdf
Calling back (Call Display
subscribers only)
n Using a landline:
N.
n Using a cellular line:
*1
Editing the number before calling back
n Using a landline:
1
2
3
4
n Using a cellular line:
*2
1
2
3
4
5
Erasing all messages
1
64
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
1
Press MPAUSEN during playback.
2
MbN: "Call back (Cell)" a
MSELECTN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 19).
3
MbN: Select the desired cellular phone.
a MSELECTN
Press MPAUSEN during playback.
MbN: "Edit & Call" a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 55).
M N
Press MPAUSEN during playback.
MbN: "Edit & Call" a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 55).
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 19).
MbN: Select the desired cellular phone. a
MSELECTN
MMENUN#325
2016/03/24 9:06:21