Panasonic KX-TGF370 Series Operating Instructions Manual page 28

Making/Answering Calls Using the Base Unit
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MZN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn
privacy mode on (page 45).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between a handset and the base unit.
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3
To complete the transfer:
Press MZN.
For assistance, visit www.panasonic.ca/english/support
28
TG175CSK(en)_0324_ver011.pdf
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 47) and the
2nd caller's information is displayed if you
subscribe to Call Display service (page 53 ).
Answering a 2nd call during a
landline call
1
2
3
28
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
phone.
unit.
Press MHOLDN during a landline call.
To answer the 2nd call:
Press MCELL 1N or MCELL 2N.
To hang up the 2nd call and return to the
1st call (landline call), press MZN 2 times.
2016/03/24 9:06:19