Panasonic KX-TGF370 Series Operating Instructions Manual page 22

Making/Answering Calls Using the Handset
Note:
R To change the flash time, see page 45.
For Call Waiting or Visual Call
Waiting service users
To use Call Waiting or Visual Call Waiting, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a Call Waiting tone.
If you subscribe to both Call Display and
Visual Call Waiting services, the 2nd caller's
information is displayed after you hear the Call
Waiting tone on the handset.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
For assistance, visit www.panasonic.ca/english/support
22
TG175CSK(en)_0324_ver011.pdf
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to more clearly, by
reducing the surrounding noise coming from
the other party's telephone.
1
2
Note:
R The setting you made is kept for each line
R Depending on the environment where this
R This feature is not available while using the
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
2
3
4
Note:
R The setting you made is kept for each line
R Depending on the condition and quality of
is
R This feature is not available while using the
R When both the "Equalizer" setting and
22
Press MMENUN while talking.
MbN: "Noise reduction on" or
"Noise reduction off" a
MSELECTN
(landline and cellular lines).
The default settings are as follows:
– for landline: "Noise reduction off"
– for cellular lines: "Noise reduction
on"
handset is being used, this feature may not
be effective.
speakerphone.
Press MMENUN while talking.
MbN: "Equalizer" a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
(landline and cellular lines).
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
speakerphone.
noise reduction are activated,
shown on the display.
is
2016/03/24 9:06:19