Table of Contents
Advertisement
3. Pull the socket
out of the lamp
assembly.
4. Push in gently on
the bulb, turn it to
the left and
remove it from
the socket.
5. Put the new bulb in the socket, gently press in on the bulb and
turn it
to
6. Put the socket back into the lamp assembly and turn it socket to the
the right until it is tight.
right until
it
locks.
7. Put the parkinghrn signal lamp assembly back into the vehicle and
tighten the screws.
Side Marker Lamps with Sealed Beam and
Composite Headlamps
1. Remove the
screws and pull
out the
parkinghurn
signal lamp
assembly.
2. Reach through
the opening and
turn the side
marker bulb
socket to the left
and remove it.
6-SO
Advertisement
Table of Contents
