Table of Contents
Advertisement
PROGRAM
-
To go from one side of the tape to the other, press the
VOL-RCL knob.
EJECT
-
To remove the tape or stop the tape and switch to radio, press the
EJECT button.
If a tape is inserted with side " I " (or "A") up, then the right arrow means
that that side is being played. Likewise, a left arrow would indicate that side
"2" (or "B") had been selected. The player will automatically switch to the
other side of the tape when the first side ends.
How to Operate Your E T , AM-FM Stereo Audio
Cassette ATC System
This part tells you how your ETR@AM-FM stereo audio cassette ATC
system works.
Upper Knob (PWR-VOL)
-
The upper knob has these two functions:
Push it to switch the system on and off.
Turn it to control the volume.
SCV (Speed Compensated Volume)
-
Move the control ring behind the
upper knob clockwise to adjust the Speed Compensated Volume feature. As
you drive, this feature increases the volume to overcome noise at any
particular speed. Each clockwise position on the control ring allows more
compensation and at a faster rate.
AM/FM
-
Press this button to switch between AM, FMl and FM2. The
display will show what mode the receiver is in.
3-14
Advertisement
Table of Contents
