Side Identification Marker Lamps; Roof Marker Lamps - Chevrolet 2006 Tahoe Owner's Manual

Side Identification Marker Lamps
To replace a side identification marker bulb, do
the following:
1. Locate the lamp gasket near the rear wheel to
expose the service slot and pull back the edge.
2. Using a flat tool, push into the slot to release the
lamp housing.
3. Pull the housing out to expose the wiring harness
and connector.
4. Unplug the lamp assembly harness from the
housing.
5. Unplug the lamp.
6. Put in a new lamp and snap it into the housing.
7. Reinstall the lamp housing.
5-54

Roof Marker Lamps

To replace a roof marker lamp bulb, do the following:
1. Remove the
two screws and
lift off the lens.