Table of Contents
Advertisement
Maintenance Schedule I
-
Gasoline Engines With
Light Duty Emissions
(Continued)
0
Check readfront axle tluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
0
Rotate tires. See "Tire Inspection and Rotation'' in the Index for proper
rotation pattern and additional information.
DATE
SERVICED BY:
ACTUAL MILEAGE
9,000 Miles (15 000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is IO" F
(-1 2" C), or higher. When weather is cold, let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 6 months, whichever occurs first).
0
Check readfront axle fluid level and add tluid as needed. Check
constant velocity joints and axle seals for leaking.
**
DATE
SERVICED BY:
ACTUAL MILEAGE
a
7-1 4
Advertisement
Table of Contents
