Table of Contents
Advertisement
Easy Entry Seat (Suburban Second Seat)
The right side of the rear 60/40 split folding bench seat, available in the
Suburban, has an easy entry feature. That makes it easy to get in and out of
the third seat, if you have one.
,,
: :
....
.
To
operate the seat,
move the lever at the
side of the seat down.
Tilt the seatback toward the front of the vehicle by pulling the top of the
seatback forward.
When you do, the seat bottom will release. Just pull the seat forward until it
stops.
There is also a foot
operated release lever
for rear seat
passengers to use
when getting out of
the third seat.
To release the easy entry second seat, lift up on the top of the release lever
with your foot. Push the top of the seatback forward and tilt it toward the
front of the vehicle.
To return the seat to its regular position, return the seatback to its upright
position, then push the whole seat rearward until
it
latches.
After returning the seat to its regular position, try to move the seat with your
body, to make sure the seat is locked into place.
1-7
Advertisement
Table of Contents
