Table of Contents
Advertisement
To Unlock THEFTLOCK After
a
Power Loss
When battery power is reapplied to a secured radio, the radio won't turn on
and "LOC" will appear on the display.
Enter your secret code as follows. Pause no more than 15 seconds between
steps.
1. Turn the ignition on.
2. Turn the radio off.
3. Press MIN and "000" will appear on the display.
4. Press the MIN button again to make the last two digits agree with your
code.
5.
Press HR to make the first one or two digits agree with your code.
6. Press AM/FM after you have confirmed that the code matches the one
you
wrote down. SEC appears in the display indicating that the radio is
now operable.
To Disable THEFTLOCK
1 . Turn the ignition on.
2. Turn the radio off.
3. With the time showing in the display, press the 1 and 4 buttons
together. Hold them down until "SEC" shows on the display.
You are now ready to enter your secret code. Don't wait more than 15
seconds between any
of
the following steps.
4. Press MIN and "000" will appear on the display.
5. Press the MIN button again to make the last two digits agree with your
code.
6. Press HR to make the first one or two digits agree with your code.
7. Press AMEM after
you have confirmed that the code matches the one
you wrote down.
" -
"
will appear in the display, indicating that the
system is unsecured (disabled).
If the code is incorrect, "SEC" will appear in the display and the system will
still be secured. The radio will still operate if it is secured or unsecured. If
"SEC" appears and you still want to disable the system, follow the disable
procedure again and enter the correct code.
3-24
Advertisement
Table of Contents
