Chevrolet 1999 Cavalier Owner's Manual
  1. Manuals
  2. Brands
  3. Chevrolet Manuals
  4. Automobile
  5. 1999 Cavalier
  6. Owner's manual

Chevrolet 1999 Cavalier Owner's Manual

Chevrolet 1999 cavalier owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

The 1999 Chevrolet Cavalier Owner's Manual
-
1
1
Seats and Restraint Systems
This section tells you how to use your seats and safety belts properly. It also explains the "SRS" system.
-
2
1
Features and Controls
This section explains how to start and operate your vehicle.
-
3
1
Comfort Controls and Audio Systems
This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system.
-
4
1
Your Driving and the Road
Here you'll find helpful information and tips about the road and how to drive under different conditions.
-
5
1
Problems on the Road
This section tells you what to do if you have a problem while driving, such as a flat tire or overheated engine, etc.
-
6
1
Service and Appearance Care
Here the manual tells you how to keep your vehicle running properly and looking good.
-
7
1
Maintenance Schedule
This section tells you when to perform vehicle maintenance and what fluids and lubricants to use.
-
8
1
Customer Assistance Information
This section tells you how to contact Chevrolet for assistance and how to get service and owner publications.
It also gives you information on "Reporting Safety Defects" on page 8
-
9
1
Index
Here's an alphabetical listing of almost every subject in this manual. You can use it to quickly find
something you want to read.
-
10.
yellowblue
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1999 Cavalier and is the answer not in the manual?

Questions and answers

Related Manuals for Chevrolet 1999 Cavalier

Summary of Contents for Chevrolet 1999 Cavalier

  • Page 1 This section tells you when to perform vehicle maintenance and what fluids and lubricants to use. Customer Assistance Information This section tells you how to contact Chevrolet for assistance and how to get service and owner publications. It also gives you information on “Reporting Safety Defects” on page 8 Index Here’s an alphabetical listing of almost every subject in this manual.

  • Page 2: For Canadian Owners Who Prefer A French Language Manual

    For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you’re on the road.
  • Page 3 You have selected a vehicle designed, engineered and crafted by teamwork, a Louis Chevrolet, the other half of the team, at the wheel of his experimental “Classic Six,” which entered production in 1912. That year 2999 vehicles were produced.
  • Page 4 The Chevrolet blend of value and performance has become an American tradition -- whether bred for the racetrack like the legendary Corvette and Camaro, or In 1932 Chevrolet introduced the Synchro Mesh transmission and offered a host of accessories -- including...
  • Page 5 Camaro, and powerplants like the legendary 327 V8. The 1957 Chevy started a romance with the American public -- and was powered by an available fuel Your new Chevrolet continues a tradition of quality and value. yellowblue injected V8.

  • Page 6: How To Use This Manual

    How to Use this Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly.

  • Page 7: Vehicle Damage Warnings

    Vehicle Damage Warnings Also, in this book you will find these notices: NOTICE: These mean there is something that could damage your vehicle. In the notice area, we tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly.

  • Page 8: Vehicle Symbols

    Vehicle Symbols These are some of the symbols you may find on your vehicle. For example, These symbols these symbols are important are used on an for you and original battery: your passengers whenever your vehicle is CAUTION driven: POSSIBLE INJURY DOOR LOCK PROTECT...

  • Page 9: Table Of Contents

    Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also learn about some things you should not do with air bags and safety belts. Seats and Seat Controls Safety Belts: They’re for Everyone Here Are Questions Many People Ask About...

  • Page 10: Seats And Seat Controls

    Seats and Seat Controls This section tells you about the seats adjust them and also about reclining seatbacks and head restraints. Manual Front Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.

  • Page 11: Manual Lumbar Support (If Equipped)

    If your vehicle is not equipped with easy entry seats, your passenger seat adjuster looks like this. Slide the lever under the passenger’s seat to the right to unlock it. Slide the seat to where you want it. Then release the lever and try to move the seat with your body, to make sure the seat is locked into place.

  • Page 12: Reclining Front Seatbacks

    Reclining Front Seatbacks To adjust the seatback, lift the lever on the outer side of the seat and move the seatback to where you want it. Release the lever to lock the seatback. Pull up on the lever and the seat will go to an upright position. But don’t have a seatback reclined if your vehicle is moving.

  • Page 13: Head Restraints

    CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.
  • Page 14 When you return the seatback to its original position, make sure the seatback is locked. The latch must be down for the seat to work properly. CAUTION: If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.

  • Page 15: Rear Seats

    Rear Seats Folding the Rear Seat To open the fold down rear seat, pull forward on the seat tab. To close the seat, push the seatback up to its original position. Check to ensure the seatback is in its original position and securely latched by pulling forward on the top of the seatback.

  • Page 16: Safety Belts: They're For Everyone

    Safety Belts: They’re for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Restraint System (SRS), or air bag system. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly.

  • Page 17: Why Safety Belts Work

    In most states and Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up a person wouldn’t survive.
  • Page 18 yellowblue Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop. 1-10...
  • Page 19 yellowblue The person keeps going until stopped by something. or the instrument panel ... In a real vehicle, it could be the windshield ... 1-11...

  • Page 20: Here Are Questions Many People Ask About

    or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-12 Here Are Questions Many People Ask About Safety Belts...

  • Page 21: How To Wear Safety Belts Properly

    If I’m a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you’re in an accident even one that isn’t your fault your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers.

  • Page 22: Driver Position

    Driver Position This part describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat (to see how, see “Seats” in the Index) so you can sit up straight.
  • Page 23 yellowblue If the belt stops before it reaches the buckle, tilt 5. To make the lap part tight, pull down on the buckle the latch plate and keep pulling until you can buckle end of the belt as you pull up on the shoulder belt. the belt.
  • Page 24 yellowblue The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
  • Page 25 Shoulder Belt Height Adjuster (4 Before you begin to drive, move the shoulder belt adjuster to the height that is right for you. Door Models) To move it down, squeeze the release button and move the height adjuster to the desired position. You can move the adjuster up just by pushing up on the shoulder belt guide.
  • Page 26 What’s wrong with this? The shoulder belt is too loose. It won’t give nearly as much protection this way. 1-18 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
  • Page 27 What’s wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
  • Page 28 What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 1-20 CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
  • Page 29 What’s wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.

  • Page 30: Safety Belt Use During Pregnancy

    To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.

  • Page 31: Right Front Passenger Position

    The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
  • Page 32 CAUTION: Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, as you would be if you were leaning forward, it could seriously injure you. This is true even with Next Generation frontal air bags.

  • Page 33: How The Air Bag System Works

    How the Air Bag System Works Where are the air bags? The driver’s air bag is in the middle of the steering wheel. The right front passenger’s air bag is in the instrument panel on the passenger’s side. yellowblue 1-25...
  • Page 34 CAUTION: If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering.
  • Page 35 What makes an air bag inflate? In an impact of sufficient severity, the air bag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag and related hardware are all part of the air bag modules inside the steering wheel and in the instrument panel in front of the right front passenger.
  • Page 36 CAUTION: When an air bag inflates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but can’t get out of the vehicle after an air bag inflates, then get fresh air by opening a window or door.

  • Page 37: Servicing Your Air Bag-Equipped Vehicle

    If your vehicle ever gets into a lot of water water up to the carpeting or higher your vehicle and soaks the carpet, the air bag controller can be soaked and ruined. If this ever happens, and then you start your vehicle, the damage could make the air bags inflate, even if there’s no crash.

  • Page 38: Rear Seat Outside Passenger Positions

    Rear Seat Outside Passenger Positions Shoulder Belt The positions next to the windows have lap belts. Here’s how to wear one properly. 1-30 shoulder 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly.
  • Page 39 yellowblue If the belt stops before it reaches the buckle, tilt the 3. To make the lap part tight, pull down on the buckle latch plate and keep pulling until you can buckle it. end of the belt as you pull up on the shoulder part. Pull up on the latch plate to make sure it is secure.
  • Page 40 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less 1-32 likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.

  • Page 41: Rear Safety Belt Comfort Guides For Children And Small Adults

    yellowblue Rear Safety Belt Comfort Guides for Children and Small Adults Rear shoulder belt comfort guides will provide added safety belt comfort for children who have outgrown child restraints and for small adults. When installed on a shoulder belt, the comfort guide pulls the belt away from the neck and head.
  • Page 42 1. Pull the elastic cord out from between the edge of the seatback and the interior body to remove the guide from its storage clip. 1-34 2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide.
  • Page 43 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 4. Buckle, position and release the safety belt as described in “Rear Seat Outside Passenger Positions” earlier in this section.

  • Page 44: Lap Belt

    yellowblue Center Passenger Position Lap Belt When you sit in the center seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt. 1-36...

  • Page 45: Smaller Children And Babies

    To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
  • Page 46 CAUTION: Smaller children and babies should always be restrained in a child or infant restraint. The instructions for the restraint will say whether it is the right type and size for your child. A very young child’s hip bones are so small that a regular belt might not stay low on the hips, as it should.
  • Page 47 CAUTION: Never hold a baby in your arms while riding in a vehicle. A baby doesn’t weigh much crash. During a crash a baby will become so heavy you can’t hold it. For example, in a crash CAUTION: (Continued) CAUTION: (Continued) at only 25 mph (40 km/h), a 12 will suddenly become a 240 your arms.

  • Page 48: Child Restraints

    Child Restraints Every time infants and young children ride in vehicles, they should have protection provided by appropriate restraints. What are the different types of add child restraints? on child restraints are available in four basic types. When selecting a child restraint, take into consideration not only the child’s weight and size, but also whether or not the restraint will be compatible with the motor vehicle in which it will...
  • Page 49 yellowblue A rear facing infant restraint (B) positions an infant to face the rear of the vehicle. Rear facing infant restraints are designed for infants of up to about 20 lbs. (9 kg) and about one year of age. This type of restraint faces the rear so that the infant’s head, neck and body can have the support they need in a frontal crash.
  • Page 50 yellowblue A forward facing child restraint (C E) positions a child upright to face forward in the vehicle. These forward facing restraints are designed to help protect children who are from 20 to 40 lbs. (9 to 18 kg) and about 26 to 40 inches (66 to 102 cm) in height, or up to around four years of age.
  • Page 51 yellowblue A booster seat (F, G) is designed for children who are about 40 to 60 lbs., or even up to 80 lbs. (18 to 27 kg, or even up to 36 kg), and about four to eight years of age. A booster seat is designed to improve the fit of the vehicle’s safety belt system.

  • Page 52: Where To Put The Restraint

    When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both.

  • Page 53: Top Strap

    Top Strap Canadian law requires that forward child restraints have a top strap, and that the strap be anchored. If your child restraint has a top strap, it should be anchored. If you have a convertible, don’t use a restraint like that in your vehicle because the top strap anchor cannot be installed properly.

  • Page 54: Securing A Child Restraint In A Rear Outside Seat Position

    Securing a Child Restraint in a Rear Outside Seat Position You’ll be using the lap shoulder belt. See the earlier part about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint.
  • Page 55 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward facing child restraint, you may find it helpful to use your knee to push down on the child...

  • Page 56: Securing A Child Restraint In The Center Rear Seat Position

    To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Center Rear Seat Position You’ll be using the lap belt.
  • Page 57 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. To tighten the belt, pull its free end while you push down on the child restraint. If you’re using a forward facing child restraint, you may find it helpful to use your knee to push down on the child...

  • Page 58: Securing A Child Restraint In The Right Front Seat Position

    Securing a Child Restraint in the Right Front Seat Position Your vehicle has a right front passenger air bag. Never put a rear facing child restraint in this seat. Here’s why: CAUTION: A child in a rear facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates, even though your vehicle has Next Generation frontal air bags.
  • Page 59 4. Tilt the latch plate to adjust the belt if needed. If the shoulder belt goes in front of the child’s face or neck, put it behind the child restraint. 5. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

  • Page 60: Larger Children

    6. To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 7.
  • Page 61 Accident statistics show that children are safer if they are restrained in the rear seat. But they need to use the safety belts properly. Children who aren’t buckled up can be thrown out in a crash. Children who aren’t buckled up can strike other people who are.
  • Page 62 1-54 CAUTION: Never do this. Here a child is sitting in a seat that has a shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.

  • Page 63: Safety Belt Extender

    Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
  • Page 64 yellowblue NOTES 1-56...

  • Page 65: Section 2 Features And Controls

    Section 2 Features and Controls Here you can learn about the many standard and optional features on your vehicle, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.
  • Page 66 yellowblue Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.
  • Page 67 If you lose your key, you’ll be able to have a new one made easily using the tag. If you need a new key, contact your Chevrolet dealer who can obtain the correct key code. In an emergency,...

  • Page 68: Door Locks

    Door Locks CAUTION: Unlocked doors can be dangerous. Passengers especially children open the doors and fall out. When a door is locked, the inside handle won’t open it. Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. This may not be so obvious: You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked.

  • Page 69: Power Door Locks - If Equipped

    Power Door Locks (If Equipped) You can lock or unlock all doors of your vehicle from the driver’s or front passenger’s door lock switch. Push the lower portion of the switch to lock your doors. Push the upper portion of the switch to unlock your doors. The lever on each rear door works only that door’s lock.

  • Page 70: Leaving Your Vehicle

    To Open a Rear Door With the Security Lock 1. Unlock the door from the inside. 2. Then open the door from the outside. If you don’t cancel the security lock feature, adults or older children who ride in the rear won’t be able to open the rear door from the inside.
  • Page 71 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 72: Matching Transmitter(S) To Your Vehicle

    Operation The following functions are available with the remote keyless entry system: LOCK: All doors will automatically lock when the LOCK button on the transmitter is pressed. The interior lamps stay on for a few seconds after all of the doors are closed.

  • Page 73: Battery Replacement

    Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about two years. You can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’s probably time to change the battery.
  • Page 74 3. Read the instructions inside the case. 4. Put the two halves back together. Make sure the cover is on tightly, so water won’t get in. 5. Check the operation of the transmitter with your vehicle. If the transmitter does not work, try resynchronizing the transmitter with the receiver.

  • Page 75: Remote Trunk Release (If Equipped)

    Remote Trunk Release (If Equipped) Pull upward on the remote release handle, located on the floor near the left side of the driver’s seat, to release the trunk lid. Theft Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft features, we know that nothing we put on it can make it impossible to steal.

  • Page 76: Parking Lots

    You may also want to check the fuses (see “Fuses and Circuit Breakers” in the Index). See your dealer for service. In an emergency, call the Chevrolet Roadside Assistance CHEV-USA R (1 Center at 1 In Canada call 1 6800.

  • Page 77: Ignition Positions

    New Vehicle “Break In” NOTICE: Your vehicle doesn’t need an elaborate “break in.” But it will perform better in the long run if you follow these guidelines: Don’t drive at any one speed slow for the first 500 miles (805 km). Don’t make full throttle starts.
  • Page 78 With the ignition key in the ignition switch, you can turn the switch to five positions. ACCESSORY (A): In this position, you can operate your electrical power accessories. Press in the ignition switch as you turn it toward you. 2-14 LOCK (B): This is the only position in which you can remove the key.
  • Page 79 CAUTION: On manual transaxle vehicles, turning the key to LOCK will lock the steering column and result in a loss of ability to steer the vehicle. This could cause a collision. If you need to turn the engine off while the vehicle is moving, turn the key only to OFF.

  • Page 80: Starting Your Engine

    To restart when you’re already moving, use NEUTRAL (N) only. NOTICE: Don’t try to shift to PARK (P) if your Chevrolet is moving. If you do, you could damage the transaxle. Shift to PARK (P) only when your vehicle is stopped.
  • Page 81 NOTICE: Your engine is designed to work with the electronics in your vehicle. If you add electrical parts or accessories, you could change the way the engine operates. Before adding electrical equipment, check with your dealer. If you don’t, your engine might not perform properly. If you ever have to have your vehicle towed, see the part of this manual that tells how to do it without damaging your vehicle.

  • Page 82: Engine Coolant Heater (If Equipped)

    3. If your engine still won’t start (or starts but then stops), it could be flooded with too much gasoline. Try pushing your accelerator pedal all the way to the floor and holding it there as you hold the key in START for a maximum of 15 seconds.

  • Page 83: To Use The Engine Coolant Heater

    2.4L L4 Engine In very cold weather, 0 _ F ( 18 _ C) or colder, the engine coolant heater can help. You’ll get easier starting and better fuel economy during engine warm the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle.

  • Page 84: Automatic Transaxle Operation

    4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it away from moving engine parts. If you don’t, it could be damaged. How long should you keep the coolant heater plugged in? The answer depends on the outside temperature, the kind of oil you have, and some other things.
  • Page 85 Four Speed Automatic Transaxle PARK (P): This position locks your front wheels. It’s the best position to use when you start your engine because your vehicle can’t move easily. CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.
  • Page 86 Ensure the shift lever is fully in PARK (P) before starting the engine. Your vehicle has a Brake Shift Interlock (BTSI). You have to fully apply your regular brakes before you can shift from PARK (P) when the ignition key is in RUN. If you cannot shift out of PARK (P), ease pressure on the shift lever shift lever all the way into PARK (P) and also release the shift lever button on floor shift console models as...
  • Page 87 Forward Gears (3-Speed) DRIVE (D): This position is for normal driving. SECOND (2): This position gives you more power but lower fuel economy. You can use SECOND (2) on hills. It can help control your speed as you go down steep mountain roads, but then you would also want to use your brakes off and on.
  • Page 88 Forward Gears (4-Speed) AUTOMATIC OVERDRIVE (D): This position is for normal driving with the four speed automatic transaxle. If you need more power for passing, and you’re: Going less than about 35 mph (55 km/h), push your accelerator pedal about halfway down. Going about 35 mph (55 km/h), push your accelerator all the way down.

  • Page 89: Manual Transaxle Operation

    NOTICE: If your front wheels can’t rotate, don’t try to drive. This might happen if you were stuck in very deep sand or mud or were up against a solid object. You could damage your transaxle. Also, if you stop when going uphill, don’t hold your vehicle there with only the accelerator pedal.
  • Page 90 This is your shift pattern. Here’s how to operate your transaxle: FIRST (1): Press the clutch pedal and shift into FIRST (1). Then, slowly let up on the clutch pedal as you press the accelerator pedal. You can shift into FIRST (1) when you’re going less than 20 mph (32 km/h).

  • Page 91: Shift Speeds

    REVERSE (R): To back up, press down the clutch pedal and shift into REVERSE (R). Let up on the clutch pedal slowly while pressing the accelerator pedal. NOTICE: Shift to REVERSE (R) only after your vehicle is stopped. Shifting to REVERSE (R) while your vehicle is moving could damage your transaxle.

  • Page 92: Parking Brake

    Parking Brake The parking brake lever is located between the bucket seats. To set the parking brake, hold the brake pedal down and pull up on the parking brake lever. If the ignition is on, the brake system warning light will come on. 2-28 To release the parking brake, hold the brake pedal down.
  • Page 93 Shifting Into PARK (P) (Automatic Transaxle Only) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
  • Page 94 Leaving Your Vehicle With the Engine Running (Automatic Transaxle Only) CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.

  • Page 95: Parking Your Vehicle

    Shifting Out of PARK (P) (Automatic Transaxle Only) CAUTION: Before shifting out of PARK (P) you must fully apply your regular brakes. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured.

  • Page 96: Parking Over Things That Burn

    Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Don’t park over papers, leaves, dry grass or other things that can burn. 2-32 Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell.
  • Page 97 Running Your Engine While You’re Parked (Automatic Transaxle) It’s better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle (see the earlier Caution under “Engine Exhaust”).

  • Page 98: Manual Windows

    Windows Manual Windows On a vehicle with manual windows, use the window crank to open and close each window. Power Windows (If Equipped) With power windows, switches on the center console control each of the windows when the ignition is on. In addition, on four door models, each rear passenger door has a control switch for its own window.

  • Page 99: Tilt Wheel (If Equipped)

    Tilt Wheel (If Equipped) A tilt steering wheel allows you to adjust the steering wheel before you drive. You can also raise it to the highest level to give your legs more room when you exit and enter the vehicle. To tilt the wheel, hold the steering wheel and pull the lever.

  • Page 100: Turn Signal And Lane Change Indicator

    Turn Signal and Lane Change Indicator The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically.

  • Page 101: Windshield Wipers

    Windshield Wipers You control the windshield wipers by moving the stalk with the windshield wiper symbol on it up or down. For a single wiper cycle, push the stalk down to MIST, then release it. The wipers will stop after one cycle. For more cycles, hold the wiper stalk down longer.

  • Page 102: Windshield Washer

    Windshield Washer To wash your windshield, pull the stalk with the wiper symbol on it toward you one time. When you release the stalk, the washers will stop. The wipers continue wiping for approximately three cycles and will either stop or will resume the speed you were using before.
  • Page 103 CAUTION: Cruise control can be dangerous where you can’t drive safely at a steady speed. So, don’t use your cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause needless wheel spinning, and you could lose control.
  • Page 104 Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake or clutch pedal. This, of course, shuts off the cruise control. But you don’t need to reset it. Once you’re going about 25 mph (40 km/h) or more, you can briefly move the cruise control switch from ON to R/A.

  • Page 105: Exterior Lamps

    Using Cruise Control on Hills How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up a steep hill, you may have to step on the accelerator pedal to maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speed down.

  • Page 106: Daytime Running Lamps

    Parking Lamps This position will turn on the following: Parking Lamps Sidemarker Lamps Taillamps Instrument Panel Lights Headlamps This position will turn on the following: Headlamps Parking Lamps Sidemarker Lamps Taillamps Instrument Panel Lights Turn the band rearward to turn the lamps off. Lamps On Reminder If you open the driver’s door with the ignition off and the lamps on, you will hear a warning chime.

  • Page 107: Fog Lamps (If Equipped)

    A flashing DRL telltale indicates a possible burned out headlamp, or that the vehicle may need service to repair a stuck DRL relay. When the DRL are on, only your high will be on at reduced brightness. The taillamps, sidemarker and other lamps won’t be on. Your instrument panel won’t be lit up either.

  • Page 108: Illuminated Entry

    Fog lamps will go off whenever the high headlamps come on. When the high beams go off, the fog lamps will come on again. Interior Lamps Instrument Panel Intensity Control You can brighten or dim the instrument panel lights by turning the dial up or down.

  • Page 109: Battery Saver

    Front Reading Lamps (If Equipped) These lamps are located on the rearview mirror. Turn each one on and off by pressing its switch. Map Lamps (If Equipped) These lamps are located forward of the dome lamp. To turn the lamps on, press the switch. Press the switch again to turn them off.

  • Page 110: Inside Day/Night Rearview Mirror

    Mirrors Inside Day/Night Rearview Mirror To reduce glare from lamps behind you, move the lever toward you to the night position. Manual Remote Control Mirror The outside rearview mirror should be adjusted so you can just see the side of your vehicle when you are sitting in a comfortable driving position.

  • Page 111: Storage Compartments

    CAUTION: A convex mirror can make things (like other vehicles) look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on your right. Check your inside mirror or glance over your shoulder before changing lanes.

  • Page 112: Accessory Power Outlet

    NOTICE: Don’t hold a cigarette lighter in with your hand while it is heating. If you do, it won’t be able to back away from the heating element when it’s ready. That can make it overheat, damaging the lighter and the heating element. To clean the center console ashtray, remove the entire ashtray and empty it.

  • Page 113: Sunroof (If Equipped)

    Sunroof (If Equipped) Press and release the rear of the switch and the glass panel will open to the vent position. Open the sunshade by hand when using the vent position. Press and release the rear of the switch again to open the glass panel and the sunshade.
  • Page 114 Lowering Your Convertible Top 1. Set the parking brake and shift your automatic transaxle to PARK (P) or your manual transaxle to NEUTRAL (N). 2. Turn the ignition to RUN. 3. Lower the side door windows completely to avoid wear to the weatherstrips. 4.

  • Page 115: Installing The Boot

    6. Rotate the latch handle up to the locked position. Installing the Boot 1. From inside the vehicle, pull the tab on the rear seat to fold down the seat. See “Fold the Index. 2. Open the trunk and remove both boot side covers. Leave the trunk open.
  • Page 116 3. Install the boot side cover by inserting the tab (A) on the underside of the cover into the slot (B) at the top of the quarter trim panel. Place the rear flap of the boot side cover in the trunk lid opening, aligning the eyelet (C) over the boot snap ball stud (D).
  • Page 117 5. Pull the boot center cover from behind the rear seatback and place it over the inner sides of the boot side covers and the lowered top. 6. Go to the rear of the vehicle. Place the boot center cover along the trunk lid opening. Align one snap on the corner of the boot to the ball stud and push forward.

  • Page 118: Removing The Boot

    Removing the Boot 1. Set the parking brake and shift your automatic transaxle to PARK (P) or your manual transaxle to NEUTRAL (N). 2. Open the trunk and leave it open. 3. From inside the vehicle, fold down the rear seatback. See “Fold Down Rear Seat”...
  • Page 119 yellowblue 5. Unsnap both boot side cover snaps (E and F) from 6. Lift the side cover eyelet (C) at the rear of the side the side of the quarter trim panel. boot cover from the snap ball stud (D). Raise the back of the boot side cover to unhook the tab (A) from the slot (B) in the quarter trim panel.

  • Page 120: Raising The Convertible Top

    7. Store both boot side covers in the trunk. 8. Close the trunk. 9. Raise the rear seatback to the up position. Push the seat back to make sure it is latched. Ensure that the rear seatbelts do not become trapped behind the rear seats.
  • Page 121 6. Turn the latch handle up to lock the top. Be sure the top is securely latched on both sides. Lowering the Top Manually NOTICE: Do not attempt to lower the top manually as damage to the vehicle will occur. If the top fails to raise or lower completely, see “Raising the Top Manually”...
  • Page 122 1. Set the parking brake and shift your automatic transaxle to PARK (P) or your manual transaxle to NEUTRAL (N). Turn the engine off. 2. Push the button in the latch handle and rotate the handle down. 3. Open the trunk. Convertible Bypass Switch 2-58 4.
  • Page 123 8. Raise the top until it is all the way up. Line up the top so the pins are even with the holes. 9. Pull down on the top and rotate the latch handle up to lock the convertible top. Be sure the top is latched securely on both sides.
  • Page 124 yellowblue The Instrument Panel Your Information System 2-60...
  • Page 125 The main components of your instrument panel are: A. Instrument Panel Intensity Control B. Turn Signal/Multifunction Lever C. Hazard Warning Flashers Switch D. Ignition Switch E. Windshield Wiper/Washer Controls F. Cigarette Lighter/Accessory Power Outlet G. Audio System H. Climate Controls and Rear Window Defogger I.
  • Page 126 yellowblue Instrument Panel Clusters Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel is left in the tank, and many other things you’ll need to drive safely and economically.
  • Page 127 yellowblue Optional Cluster 2-63...

  • Page 128: Speedometer And Odometer

    Speedometer and Odometer Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada).

  • Page 129: Safety Belt Reminder Light

    Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.

  • Page 130: Charging System Light

    Air Bag Readiness Light There is an air bag readiness light on the instrument panel, which shows AIR BAG. The system checks the air bag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the air bag sensor, the air bag modules, the wiring and the crash sensing and diagnostic module.

  • Page 131: Brake System Warning Light

    Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two parts. If one part isn’t working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the warning light comes on, there is a brake problem. Have your brake system inspected right away.

  • Page 132: Enhanced Traction System Warning Light

    Anti-Lock Brake System Warning Light With the anti system, this light will come on when you start your engine and it will stay on for three seconds. That’s normal. If the light stays on, turn the ignition to OFF. Or, if the light comes on when you’re driving, stop as soon as possible and turn the ignition off.

  • Page 133: Enhanced Traction System Active Light

    The Enhanced Traction System warning light may come on for the following reasons: If you turn the system off by moving the shift lever to FIRST (1) or SECOND (2), the warning light will come on and stay on. To turn the system back on, move the shift lever back to a position other than FIRST (1) or SECOND (2).

  • Page 134: Malfunction Indicator Lamp

    Engine Coolant Temperature Gage Standard Cluster Optional Cluster Your vehicle is equipped with one of these gages. With the ignition in RUN, this gage shows the engine coolant temperature. If the gage pointer moves into the red area, your engine is too hot! It means that your engine coolant has overheated.
  • Page 135 This system is called OBD II (On Board Diagnostics Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The CHECK ENGINE light comes on to indicate that there is a problem and service is required.
  • Page 136 This light should come on, as a check to show you it is working, when the ignition is on and the engine is not running. If the light doesn’t come on, have it repaired. This light will also come on during a malfunction in one of two ways: Light Flashing A misfire condition has been...

  • Page 137: Oil Pressure Light

    If so, your electrical system may be wet. The condition will usually be corrected when the electrical system dries out. A few driving trips should turn the light off. Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel (see “Fuel”...

  • Page 138: Warning Light

    CAUTION: Don’t keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches fire. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced. NOTICE: Damage to your engine from neglected oil problems can be costly and is not covered by...

  • Page 139: Fuel Gage

    Check Gages Light This light will come on briefly when you are starting the engine. If the light comes on and stays on while you are driving, check your various gages to see if they are in the warning zones or if you are low on fuel. Fuel Gage When the ignition is on, your fuel gage tells you...
  • Page 140 yellowblue NOTES 2-76...

  • Page 141: Section 3 Comfort Controls And Audio Systems

    Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your vehicle. Be sure to read about the particular systems supplied with your vehicle. Comfort Controls Air Conditioning (If Equipped) Heating Defogging and Defrosting...

  • Page 142: Comfort Controls

    Comfort Controls This section tells you how to make your air system work for you. The optional climate control system with air conditioning uses ozone friendly R With these systems, you can control the ventilation and heating in your vehicle. Your vehicle also has the flow through ventilation system described later in this section.
  • Page 143 FLOOR: This setting sends most of the air through the ducts near the floor. The rest comes out of the defroster and side window vents. DEFOG: This setting allows half of the air to go to the floor ducts and half to the defroster and side window vents.

  • Page 144: Air Conditioning (If Equipped)

    VENT: This setting brings in outside air and directs it through the instrument panel outlets. LEVEL: This setting brings in outside air and directs it two ways. Some air is directed through the instrument panel outlets. Most of the air is directed through the floor ducts and a little to the defrost and side window vents.

  • Page 145: Defogging And Defrosting

    Heating On cold days, use FLOOR with the temperature knob all the way in the red area. The system will bring in outside air, heat it and send it to the floor ducts. Your vehicle has heat ducts that are directed toward the rear seat.

  • Page 146: Ventilation System

    NOTICE: Don’t use a razor blade or anything else sharp on the inside of the rear window. If you do, you could cut or damage the warming grid, and the repairs wouldn’t be covered by your warranty. Ventilation System For mild outside temperatures when little heating or cooling is needed, use VENT to direct outside air through your vehicle.

  • Page 147: Audio Systems

    Audio Systems Your Delco Electronics audio system has been designed to operate easily and give years of listening pleasure. You will get the most enjoyment out of it if you acquaint yourself with it first. Find out what your Delco Electronics system can do and how to operate all its controls, to be sure you’re getting the most out of the advanced engineering that went into it.
  • Page 148 Finding a Station FM: Press the lower knob to switch between AM and FM. The display shows your selection. TUNE: Turn the lower knob to choose radio stations. SEEK: Press the right or left arrow to go to the next higher or lower station and stay there.

  • Page 149: Am-Fm Stereo With Cassette Tape Player (If Equipped)

    AM-FM Stereo with Cassette Tape Player (If Equipped) Playing the Radio VOLUME: This knob turns the system on and off and controls the volume. To increase volume and turn the radio on, turn the knob clockwise. Turn it counterclockwise to decrease volume and turn the radio off.
  • Page 150 In addition to the four stations already set, up to three more stations may be preset on each band by pressing two adjoining buttons at the same time. Just: 1. Tune in the desired station. 2. Press SET. (SET will appear on the display.) 3.

  • Page 151: Am-Fm Stereo With Cassette Tape Player And Automatic Tone Control (If Equipped)

    FWD: Press the SEEK arrow pointing to the right and the tape will rapidly advance until you press this button again lightly. RECALL: Press this knob to hear the other side of a tape that is playing. EJECT: Press this button to remove the tape. The radio will play.
  • Page 152 RECALL: Press this button to recall the station being played. If you press the button when the ignition is off, the clock will show for a few seconds. SCV: Your system has a feature called Speed Compensated Volume (SCV). With SCV, your audio system adjusts automatically to make up for road and wind noise as you drive.
  • Page 153 P.SCAN: Press this button to listen to each of your favorite stations stored on your pushbuttons for a few seconds. The radio will scan through each of the stations stored on your pushbuttons, except those stations with weak reception. The AUTO TONE setting stored for that pushbutton will be automatically chosen.
  • Page 154 Playing a Cassette Tape Your tape player is built to work best with tapes that are up to 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player.
  • Page 155 REV (4): Press this button to reverse the tape rapidly. Press it again to return to playing speed. The radio will play the last selected station while the tape reverses. (5): Press this button to reduce background noise. Note that the double D symbol will appear on the display.

  • Page 156: Am-Fm Stereo With Compact Disc Player And Automatic Tone Control (If Equipped)

    AM-FM Stereo with Compact Disc Player and Automatic Tone Control (If Equipped) Playing the Radio VOL: Press this knob to turn the system on and off. To increase volume, turn the knob clockwise. Turn it counterclockwise to decrease volume. The knob is capable of rotating continuously.
  • Page 157 SCAN: Press one of the SEEK arrows for two seconds, and SCAN will appear on the display. Use SCAN to listen to stations for a few seconds. The radio will go to a station, stop for a few seconds, then go on to the next station.
  • Page 158 Push these knobs back into their stored positions when you’re not using them. AUTO TONE: This feature allows you to choose preset bass and treble equalization settings designed for country/western, classical, news, rock, pop and jazz stations. C/W will appear on the display when you first press AUTO TONE.

  • Page 159: Theft-Deterrent Feature (If Equipped)

    RDM (2): Press this button to hear the tracks in random, rather than sequential, order. RANDOM will show on the display. Press RDM again to turn off random play. RDM is reset to off when the disc is ejected. NEXT (3): Press this button or the right SEEK arrow to go to the next track.
  • Page 160 When THEFTLOCK is activated, the radio will display LOC to indicate a locked condition anytime battery power has been interrupted. If your battery loses power for any reason, you must unlock the radio with the secret code before it will operate. Activating the Theft Deterrent Feature The instructions which follow explain how to enter your...

  • Page 161: Understanding Radio Reception

    4. Press HR to make the first one or two digits agree with your code. 5. Press AM FM after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure.

  • Page 162: Tips About Your Audio System

    FM Stereo FM stereo will give you the best sound, but FM signals will reach only about 10 to 40 miles (16 to 65 km). Tall buildings or hills can interfere with FM signals, causing the sound to come and go. Tips About Your Audio System Hearing damage from loud noise is almost undetectable until it is too late.

  • Page 163: Care Of Your Cassette Tape Player

    Care of Your Cassette Tape Player A tape player that is not cleaned regularly can cause reduced sound quality, ruined cassettes or a damaged mechanism. Cassette tapes should be stored in their cases away from contaminants, direct sunlight and extreme heat. If they aren’t, they may not operate properly or may cause failure of the tape player.

  • Page 164: Care Of Your Compact Discs

    3. Press and hold the TAPE AUX button for five seconds. The tape symbol on the display will flash for two seconds. 4. Insert the scrubbing action cleaning cassette. 5. Eject the cleaning cassette after the manufacturer’s recommended cleaning time. When the cleaning cassette has been ejected, the cut tape detection feature is active again.

  • Page 165: Section 4 Your Driving And The Road

    Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving. Defensive Driving Drunken Driving Control of a Vehicle Braking Steering Road Recovery...

  • Page 166: Defensive Driving

    Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. (See “Safety Belts” in the Index.) Defensive driving really means “be ready for anything.” On city streets, rural roads or freeways, it means “always expect the unexpected.”...

  • Page 167: Drunken Driving

    Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It’s the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: Judgment Muscular Coordination Vision...
  • Page 168 It’s the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour, the person’s BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level.
  • Page 169 The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or number of cold showers will speed that up. “I’ll be careful” isn’t the right answer. What if there’s an emergency, a need to take sudden action, as when a child darts into the street? A person with even a moderate BAC might not be able to react quickly enough to avoid the collision.

  • Page 170: Control Of A Vehicle

    Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you’re driving on snow or ice, it’s easy to ask more of those control systems than the tires and road can provide.

  • Page 171: Anti-Lock Brakes (Abs)

    Avoid needless heavy braking. Some people drive in spurts heavy acceleration followed by heavy braking rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking.
  • Page 172 Here’s how anti lock works. Let’s say the road is wet. You’re driving safely. Suddenly an animal jumps out in front of you. You slam on the brakes. Here’s what happens with ABS. A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each front wheel and at both rear wheels.

  • Page 173: Enhanced Traction System

    Remember: Anti lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.

  • Page 174: Braking In Emergencies

    When the transaxle shift lever is in any position other than FIRST (1) or SECOND (2) and the parking brake is fully released, this warning light will come on to let you know if there’s a problem with the system. See “Enhanced Traction System Warning Light”...

  • Page 175: Steering Tips

    Steering Tips Driving on Curves It’s important to take curves at a reasonable speed. A lot of the “driver lost control” accidents mentioned on the news happen on curves. Here’s why: Experienced driver or beginner, each of us is subject to the same laws of physics when driving on curves.

  • Page 176: Steering In Emergencies

    Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.

  • Page 177: Off Road Recovery

    Road Recovery You may find that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
  • Page 178 Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you’re following a larger vehicle. Also, you won’t have adequate space if the vehicle ahead suddenly slows or stops.

  • Page 179: Loss Of Control

    Loss of Control Let’s review what driving experts say about what happens when the three control systems (brakes, steering and acceleration) don’t have enough friction where the tires meet the road to do what the driver has asked. In any emergency, don’t give up. Keep trying to steer and constantly seek an escape route or area of less danger.

  • Page 180: Driving At Night

    Driving at Night Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired by alcohol or drugs, with night vision problems, or by fatigue. 4-16 Here are some tips on night driving. Drive defensively.

  • Page 181: Night Vision

    Night Vision No one can see as well at night as in the daytime. But as we get older these differences increase. A 50 driver may require at least twice as much light to see the same thing at night as a 20 year old.

  • Page 182: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
  • Page 183 Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you can’t, try to slow down before you hit them. CAUTION: Wet brakes can cause accidents.

  • Page 184: City Driving

    Hydroplaning usually happens at higher speeds. There just isn’t a hard and fast rule about hydroplaning. The best advice is to slow down when it is raining. Driving Through Deep Standing Water NOTICE: If you drive too quickly through deep puddles or standing water, water can come in through your engine’s air intake and badly damage your engine.

  • Page 185: Freeway Driving

    Here are ways to increase your safety in city driving: Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross Try to use the freeways that rim and crisscross most large cities.

  • Page 186: Before Leaving On A Long Trip

    If it needs service, have it done before starting out. Of course, you’ll find experienced and able service experts in Chevrolet dealerships all across North America. They’ll be ready and willing to help if you need it. yellowblue...

  • Page 187: Highway Hypnosis

    Here are some things you can check before a trip: Windshield Washer Fluid: Is the reservoir full? Are all windows clean inside and outside? Wiper Blades: Are they in good shape? Fuel, Engine Oil, Other Fluids: Have you checked all levels? Lamps: Are they all working? Are the lenses clean? Tires: They are vitally important to a safe, trouble...

  • Page 188: Hill And Mountain Roads

    Hill and Mountain Roads Driving on steep hills or mountains is different from driving in flat or rolling terrain. 4-24 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable.

  • Page 189: Winter Driving

    CAUTION: Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they wouldn’t work well. You would then have poor braking or even none going down a hill. You could crash.

  • Page 190: Driving On Snow Or Ice

    Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and a couple of reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
  • Page 191 What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it’s about freezing (32 F;...

  • Page 192: If You're Caught In A Blizzard

    If You’re Caught in a Blizzard If you are stopped by heavy snow, you could be in a serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow. Here are some things to do to summon help and keep yourself and your passengers safe: Turn on your hazard flashers.

  • Page 193: Recreational Vehicle Towing

    CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You can’t see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking your exhaust pipe.
  • Page 194 Towing Your Vehicle from the Front 3-Speed Automatic Transaxle (With a Dolly) Follow these steps: 1. Put the front wheels on a dolly. 2. Set the parking brake. 3. Open the fuse panel on the driver’s side of the instrument panel. Remove the fuse labeled CLS/PCM.
  • Page 195 1. Set the parking brake. 2. Open the fuse panel on the driver’s side of the instrument panel. Remove the fuse labeled CLS/PCM. This will keep your battery from draining while towing. See “Fuses and Circuit Breakers” in the Index. 3.

  • Page 196: Loading Your Vehicle

    Towing Your Vehicle from the Rear All Transaxles NOTICE: Do not tow your vehicle from the rear. Your vehicle could be badly damaged and the repairs would not be covered by your warranty. 4-32 Loading Your Vehicle Two labels on your vehicle show how much weight it may properly carry.
  • Page 197 The other label is the Certification label, found on the rear edge of the driver’s door. It tells you the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo.

  • Page 198: Automatic Transaxle

    CAUTION: Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. Put things in the trunk or rear area of your vehicle. In a trunk, put them as far forward as you can.

  • Page 199: If You Do Decide To Pull A Trailer

    Your vehicle can tow a trailer if it is equipped with a 2.4L L4 engine and 4 speed automatic transaxle and the proper trailer towing equipment. To identify what the vehicle trailering capacity is for your vehicle, you should read the information in “Weight of the Trailer” that appears later in this section.

  • Page 200: Weight Of The Trailer Tongue

    And, it can also depend on any special equipment that you have on your vehicle. You can ask your dealer for our trailering information or advice, or you can write us at: Chevrolet Motor Division Customer Assistance Center P.O. Box 7047 Troy, MI 48007...

  • Page 201: Total Weight On Your Vehicle's Tires

    If you’re using a weight carrying hitch, the trailer tongue (A) should weigh 10 percent of the total loaded trailer weight (B). If you have a weight hitch, the trailer tongue (A) should weigh 12 percent of the total loaded trailer weight (B). After you’ve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper.

  • Page 202: Driving With A Trailer

    Safety Chains You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailer so that the tongue will not drop to the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer.

  • Page 203: Turn Signals When Towing A Trailer

    Passing You’ll need more passing distance up ahead when you’re towing a trailer. And, because you’re a good deal longer, you’ll need to go much farther beyond the passed vehicle before you can return to your lane. Backing Up Hold the bottom of the steering wheel with one hand. Then, to move the trailer to the left, just move that hand to the left.

  • Page 204: Driving On Grades

    Driving On Grades NOTICE: Do not tow on steep continuous grades exceeding 6 miles (9.6 km). Extended, higher than normal engine and transaxle temperatures may result and damage your vehicle. Frequent stops are very important to allow the engine and transaxle to cool.

  • Page 205: Engine Cooling When Trailer Towing

    When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: Start your engine; Shift into a gear; and Release the parking brake. 2. Let up on the brake pedal. 3.
  • Page 206 yellowblue NOTES 4-42...

  • Page 207: Section 5 Problems On The Road

    Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. Hazard Warning Flashers Other Warning Devices Jump Starting Towing Your Vehicle Engine Overheating Cooling System If a Tire Goes Flat Changing a Flat Tire Compact Spare Tire If You’re Stuck: In Sand, Mud, Ice or Snow...

  • Page 208: Hazard Warning Flashers

    Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. Move the switch to the right to make your front and rear turn signal lamps flash on and off.

  • Page 209: Other Warning Devices

    Other Warning Devices If you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle.
  • Page 210 2. Get the vehicles close enough so the jumper cables can reach, but be sure the vehicles aren’t touching each other. If they are, it could cause a ground connection you don’t want. You wouldn’t be able to start your vehicle, and the bad grounding could damage the electrical systems.
  • Page 211 CAUTION: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You don’t need to add water to the ACDelco Freedom battery installed in every new GM vehicle.
  • Page 212 8. Don’t let the other end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 9. Now connect the black negative ( the good battery’s negative ( Don’t let the other end touch anything until the...
  • Page 213 CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 11. Now start the vehicle with the good battery and run the engine for a while. 12. Try to start the vehicle with the dead battery. If it won’t start after a few tries, it probably needs service.

  • Page 214: Towing Your Vehicle

    Towing Your Vehicle CAUTION: To help avoid serious personal injury to you or others: Never let passengers ride in a vehicle that is being towed. Never tow faster than safe or posted speeds. Never tow with damaged parts not fully secured. Never get under your vehicle after it has been lifted by the tow truck.

  • Page 215: Engine Overheating

    Engine Overheating You will find a coolant temperature gage and a low coolant warning light on your vehicle’s instrument panel. See “Engine Coolant Temperature Gage” and “Low Coolant Warning Light” in the Index. If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood.

  • Page 216: If No Steam Is Coming From Your Engine

    NOTICE: If your engine catches fire because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. If No Steam Is Coming From Your Engine If you get an engine overheat warning but see or hear no steam, the problem may not be too serious.

  • Page 217: Cooling System

    Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: 2.2L L4 Engine A. Coolant Surge Tank with Pressure Cap B. Electric Engine Cooling Fan 2.4L L4 Engine A. Coolant Surge Tank with Pressure Cap B.
  • Page 218 If the coolant inside the coolant surge tank is boiling, don’t do anything else until it cools down. The coolant level should be at the FULL COLD mark. If it isn’t, you may have a leak in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system.

  • Page 219: How To Add Coolant To The Coolant Surge Tank

    NOTICE: When adding coolant, it is important that you use only DEX COOL (silicate free) coolant. If coolant other than DEX COOL is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner 30,000 miles (50 000 km) or 24 months, whichever occurs first.
  • Page 220 yellowblue CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, and if you turn the coolant surge tank pressure cap even a little they can come out at high speed. Never turn the cap when the cooling system, including the coolant surge tank pressure cap, is hot.
  • Page 221 CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid like alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you wouldn’t get the overheat warning.
  • Page 222 1. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise (left) about two or two and half turns.
  • Page 223 yellowblue 3. Then fill the coolant surge tank with the proper 4. With the coolant surge tank pressure cap off, start the mixture, to the FULL COLD mark. engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan.

  • Page 224: If A Tire Goes Flat

    5. Then replace the pressure cap. Be sure the pressure cap is hand Check the level in the surge tank when the cooling system has cooled down. If the coolant isn’t at the proper level, repeat Steps 1 to 3 and reinstall the pressure cap or see your dealer.

  • Page 225: Changing A Flat Tire

    Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers. CAUTION: Changing a tire can cause an injury. The vehicle can slip off the jack and roll over you or other people.

  • Page 226: Removing The Spare Tire And Tools

    Removing the Spare Tire and Tools The equipment you’ll need is in the trunk. Turn the center retainer nut on the compact spare cover counterclockwise to remove it. 5-20 Lift and remove the cover. See “Compact Spare Tire” later in this section for more information about the compact spare.

  • Page 227: Removing The Flat Tire And Installing The Spare Tire

    The tools you’ll be using include the jack (A) and wheel wrench (B). Removing the Flat Tire and Installing the Spare Tire 1. Using the wheel wrench, remove the plastic nut caps (if equipped). yellowblue 5-21...
  • Page 228 2. On some models, a cover plate must be removed to find the wheel nuts. Carefully use the wedge end of the wheel wrench to pry it off. 3. Then use the wheel wrench to loosen all the wheel nuts. Don’t remove them yet. 5-22 4.
  • Page 229 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
  • Page 230 7. If you have a wheel cover, use your fingers to carefully pull the wheel cover from the wheel. Then remove the flat tire. 5-24 8. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts...
  • Page 231 CAUTION: Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 9. Place the spare on the wheel mounting surface. 10. Replace the wheel nuts with the rounded end of the nuts toward the wheel.
  • Page 232 12. Tighten the wheel nuts firmly in a criss sequence, as shown. 5-26 cross CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts.

  • Page 233: Storing The Flat Tire And Tools

    NOTICE: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. Don’t try to put a wheel cover on your compact spare tire.

  • Page 234: Storing The Spare Tire And Tools

    A. Wrench E. Extension F. Wing Bolt B. Jack (Extension Installed) C. Flat Road Tire G. Cover D. Adapter H. Nut Store the flat tire in the compact spare tire compartment and secure the adapter, extension (aluminum wheel only) and wing bolt. Store the jack and wheel wrench in the foam tray.

  • Page 235: Compact Spare Tire

    A. Wrench E. Wing Bolt B. Jack F. Cover C. Spare Tire G. Nut D. Adapter Compact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly.

  • Page 236: If You're Stuck: In Sand, Mud, Ice Or Snow

    NOTICE: When the compact spare is installed, don’t take your vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails. That can damage the tire and wheel, and maybe other parts of your vehicle. Don’t use your compact spare on other vehicles.

  • Page 237: Rocking Your Vehicle To Get It Out

    NOTICE: Spinning your wheels can destroy parts of your vehicle as well as the tires. If you spin the wheels too fast while shifting your transaxle back and forth, you can destroy your transaxle. For information about using tire chains on your vehicle, see “Tire Chains”...
  • Page 238 yellowblue NOTES 5-32...

  • Page 239: Section 6 Service And Appearance Care

    Section 6 Service and Appearance Care Here you will find information about the care of your vehicle. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.

  • Page 240: Doing Your Own Service Work

    Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you’ll go to your dealer for all your service needs. You’ll get genuine GM parts and trained and supported service people. We hope you’ll want to keep your GM vehicle all GM. Genuine GM parts have one of these marks: Doing Your Own Service Work If you want to do some of your own service work, you’ll...

  • Page 241: Adding Equipment To The Outside Of Your Vehicle

    AAMA specification could provide improved driveability and emission control system performance compared to other gasolines. For more information, write to: American Automobile Manufacturer’s Association, 7430 Second Ave, Suite 300, Detroit MI 48202. Be sure the posted octane is at least 87. If the octane is less than 87, you may get a heavy knocking noise when you drive.
  • Page 242 (See “Malfunction Indicator Lamp” in the Index.) If this occurs, return to your authorized Chevrolet dealer for diagnosis to determine the cause of failure. In the event it is determined that the cause of the condition is the type of fuels used, repairs may not be covered by your warranty.

  • Page 243: Fuels In Foreign Countries

    Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel may be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel wouldn’t be covered by your warranty.
  • Page 244 While refueling, hang the tethered cap inside the fuel door by placing the fuel cap strap in the strap hanger. To remove the cap, turn it slowly to the left (counterclockwise). The cap has a spring in it; if you let go of the cap too soon, it will spring back to the right.

  • Page 245: Filling A Portable Fuel Container

    When you put the cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly installed.

  • Page 246: Checking Things Under The Hood

    Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a fire.
  • Page 247 Then go to the front of the vehicle and lift up on the secondary hood release handle. The secondary hood release lever is located near the front center of the hood toward the driver’s side. To make sure that the secondary hood release handle works properly, lubricate the hood latch at least once a year.
  • Page 248 2.2L L4 Engine (Code 4) When you open the hood, you’ll see: A. Coolant Surge Tank B. Power Steering Fluid Reservoir C. Engine Oil Fill Cap/Dipstick D. Brake Fluid Reservoir 6-10 E. Hydraulic Clutch Fluid Reservoir (If Equipped) F. Automatic Transaxle Fluid Dipstick (If Equipped) yellowblue G.
  • Page 249 2.4L L4 Engine (Code T) When you open the hood, you’ll see: A. Coolant Surge Tank B. Engine Oil Fill Cap C. Engine Oil Dipstick D. Power Steering Fluid Reservoir E. Brake Fluid Reservoir F. Hydraulic Clutch Fluid Reservoir (If Equipped) G.

  • Page 250: Engine Oil

    Engine Oil It’s a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. Check the oil here if you have a 2.2L engine.

  • Page 251: When To Add Engine Oil

    Checking Engine Oil Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way. Remove it again, keeping the tip down, and check the level. When to Add Engine Oil If the oil is at or below the ADD mark, then you’ll need to add at least one quart of oil.

  • Page 252: What Kind Of Engine Oil To Use

    This is where you add oil if you have a 2.4L engine. Be sure to fill it enough to put the level somewhere in the proper operating range. Push the dipstick all the way back in when you’re through. 6-14 What Kind of Engine Oil to Use Oils recommended for your vehicle can be identified by...
  • Page 253 As shown in the chart, SAE 5W 30 is best for your vehicle. However, you can use SAE 10W to be 0 C) or above. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils, such as SAE 20W NOTICE: Use only engine oil with the American Petroleum Institute Certified For Gasoline Engines...

  • Page 254: Engine Oil Additives

    Engine Oil Additives Don’t add anything to your oil. Your dealer is ready to advise if you think something should be added. When to Change Engine Oil If any one of these is true for you, use the short trip/city maintenance schedule: Most trips are less than 5 to 10 miles (8 to 16 km).

  • Page 255: Engine Air Cleaner/Filter

    Engine Air Cleaner/Filter The air cleaner is located on the driver’s side of the engine compartment near the battery. To check or replace the filter, remove the screws that hold the cover on and lift the cover. Be sure to reinstall the air cleaner filter and replace the cover tightly.

  • Page 256: When To Check And Change

    CAUTION: Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Don’t drive with it off, and be careful working on the engine with the air cleaner/filter off.

  • Page 257: How To Check

    How to Check Because this operation can be a little difficult, you may choose to have this done at the dealership service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick.
  • Page 258 Checking the Fluid Level Park your vehicle on a level place. Keep the engine running. With the parking brake applied, place the shift lever in PARK (P). With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range.

  • Page 259: Automatic Transaxle Fluid

    How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transaxle fluid to use. See “Recommended Fluids and Lubricants” in the Index. If the fluid level is low, add only enough of the proper fluid to bring the level into the cross on the dipstick.

  • Page 260: Manual Transaxle Fluid

    6-22 How to Check Because this operation can be a little difficult, you may choose to have this done at your Chevrolet dealership Service Department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick.
  • Page 261 Then, follow these steps: 1. The manual transaxle dipstick is located below the brake master cylinder, near the rear of the transaxle case. Flip the handle up and then pull out the dipstick and clean it with a rag or paper towel.

  • Page 262: When To Check And What To Use

    How to Add Fluid Here’s how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See “Recommended Fluids and Lubricants” in the Index. 1. Remove the dipstick by flipping the handle up and then pulling the dipstick out.

  • Page 263: Engine Coolant

    How to Check You do not need to check the fluid level unless you suspect a clutch problem. To check the fluid level, take the cap off. If the fluid reaches the step inside the reservoir, the fluid level is correct. Surge Tank Pressure Cap NOTICE: Your surge tank cap is a 15 psi (105 kPa)

  • Page 264: What To Use

    NOTICE: When adding coolant, it is important that you use only DEX COOL (silicate free) coolant. If coolant other than DEX COOL is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner 30,000 miles (50 000 km) or 24 months, whichever occurs first.

  • Page 265: Checking Coolant

    NOTICE: If you use an improper coolant mixture, your engine could overheat and be badly damaged. The repair cost wouldn’t be covered by your warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core and other parts.
  • Page 266 CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap little when the engine and radiator are hot. The vehicle must be on a level surface.

  • Page 267: Windshield Washer Fluid

    Power Steering Fluid When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem.

  • Page 268: Adding Washer Fluid

    Adding Washer Fluid Open the cap labeled WASHER FLUID ONLY. Add washer fluid until the tank is full. 6-30 NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system.

  • Page 269: Brake Fluid

    Brakes Brake Fluid Your brake master cylinder reservoir is on the driver’s side of the engine compartment. It is filled with DOT There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear.
  • Page 270 What to Add When you do need brake fluid, use only DOT fluid. Use new brake fluid from a sealed container only. Refer to “Recommended Fluids and Lubricants” in the Maintenance Schedule. Always clean the brake fluid reservoir cap and the area around the cap before removing it.

  • Page 271: Brake Wear

    Brake Wear Your vehicle has front disc brakes and rear drum brakes. Disc brake pads have built in wear indicators that make a high pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal firmly).

  • Page 272: Brake Adjustment

    Brake Pedal Travel See your dealer if the brake pedal does not return to normal height, or if there is a rapid increase in pedal travel. This could be a sign of brake trouble. Brake Adjustment Every time you make a moderate brake stop, your disc brakes adjust for wear.

  • Page 273: Halogen Bulbs

    The following procedures tell you how to replace the bulbs for your vehicle. For the type of bulb to use, see “Replacement Bulbs” in the Index. For any bulb changing procedure not listed in this section, contact your Chevrolet dealer’s service department. Halogen Bulbs Deterrent CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
  • Page 274 Headlamps 1. Remove the first bolt. Then remove the remaining plastic fasteners holding the shield. Use the end of a flat head screwdriver to pull up the center of the fastener. Be careful not to break the fasteners that hold the shield in place. 6-36 2.
  • Page 275 3. Disconnect the bulb base from the socket by lifting the plastic locking tab. 4. Snap a new bulb into the socket. 5. Replace the bulb assembly by reversing Steps 1 through 3, making sure the lower leg of the headlamp bracket is properly seated into the wedge shaped retainer.
  • Page 276 Taillamps and Rear Turn Signal Lamps To replace a bulb, do the following: 1. Remove the fastener which holds down the trunk trim. On vehicles without a convenience net, pry the fastener loose. On vehicles with a convenience net, remove the net and unscrew the fastener. Then pull down the trunk trim.

  • Page 277: Back-Up Lamps

    Back-Up Lamps To replace a back up lamp, do the following: 1. Open the trunk lid and locate the back assembly on the trunk lid. 2. Gently remove the bulb from the socket by turning it counterclockwise and pulling it out. 3.

  • Page 278: Windshield Wiper Blade Replacement

    Your new vehicle comes with high a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your Chevrolet Warranty booklet for details. CAUTION: Poorly maintained and improperly used tires are dangerous.

  • Page 279: Inflation -- Tire Pressure

    CAUTION: (Continued) Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when your tires are cold. Overinflated tires are more likely to be cut, punctured or broken by a sudden impact such as when you hit a pothole.

  • Page 280: Tire Inspection And Rotation

    When to Check Check your tires once a month or more. Don’t forget your compact spare tire. It should be at 60 psi (420 kPa). How to Check Use a good quality pocket type gage to check tire pressure. You can’t tell if your tires are properly inflated simply by looking at them.
  • Page 281 CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.

  • Page 282: Buying New Tires

    The tread or sidewall is cracked, cut or snagged deep enough to show cord or fabric. The tire has a bump, bulge or split. The tire has a puncture, cut or other damage that can’t be repaired well because of the size or location of the damage.

  • Page 283: Uniform Tire Quality Grading

    Uniform Tire Quality Grading The following information relates to the system developed by the United States National Highway Traffic Safety Administration, which grades tires by treadwear, traction and temperature performance. (This applies only to vehicles sold in the United States.) The grades are molded on the sidewalls of most passenger car tires.

  • Page 284: Wheel Replacement

    Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.

  • Page 285: Tire Chains

    CAUTION: Using the wrong replacement wheels, wheel bolts or wheel nuts on your vehicle can be dangerous. It could affect the braking and handling of your vehicle, make your tires lose air and make you lose control. You could have a collision in which you or others could be injured.

  • Page 286: Appearance Care

    NOTICE: (Continued) Use another type of traction device only if its manufacturer recommends it for use on your vehicle and tire size combination and road conditions. Follow that manufacturer’s instructions. To help avoid damage to your vehicle, drive slowly, readjust or remove the device if it’s contacting your vehicle, and don’t spin your wheels.

  • Page 287: Cleaning The Inside Of Your Vehicle

    Don’t use any of these unless this manual says you can. In many uses, these will damage your vehicle: Alcohol Laundry Soap Bleach Reducing Agents Cleaning the Inside of Your Vehicle Use a vacuum cleaner often to get rid of dust and loose dirt.

  • Page 288: Cleaning The Top Of The Instrument Panel

    Special Fabric Cleaning Problems Stains caused by such things as catsup, coffee (black), egg, fruit, fruit juice, milk, soft drinks, vomit, urine and blood can be removed as follows: 1. Carefully scrape off excess stain, then sponge the soiled area with cool water. 2.

  • Page 289: Cleaning Interior Plastic Components

    Cleaning Interior Plastic Components Use only a mild soap and water solution on a soft cloth or sponge. Commercial cleaners may affect the surface finish. Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them.

  • Page 290: Cleaning The Outside Of Your Vehicle

    Weatherstrips Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth at least every six months. During very cold, damp weather more frequent application may be required. (See “Recommended Fluids and Lubricants”...
  • Page 291 NOTICE: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may dull the finish or leave swirl marks. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage your vehicle’s finish if they remain on painted surfaces.

  • Page 292: Cleaning Aluminum Wheels

    To protect the convertible top: After you wash the vehicle, make sure the top is completely dry before you lower it. Don’t get any cleaner on the vehicle’s painted finish; it could leave streaks. If you decide to go through an automatic car wash, ask the manager if the equipment could damage your top.

  • Page 293: Chemical Paint Spotting

    Although no defect in the paint job causes this, Chevrolet will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout condition within 12 months or 12,000 miles (20 000 km) of purchase, whichever occurs first.

  • Page 294: Gm Vehicle Care/Appearance Materials

    GM Vehicle Care/Appearance Materials PART NUMBER SIZE 994954 23 in. x 25 in. 1050172 16 oz. (0.473 L) 1050173 16 oz. (0.473 L) 1050174 16 oz. (0.473 L) 1050214 32 oz. (0.946 L) 1050427 23 oz. (0.680 L) 1052918** 8 oz. (0.237 L) 1052925 16 oz.

  • Page 295: Electrical System

    Vehicle Identification Number (VIN) This is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle. The VIN also appears on the Vehicle Certification and Service Parts labels and the certificates of title and registration.

  • Page 296: Power Windows And Other Power Options

    Headlamp Wiring The headlamp wiring is protected by fuses. Should your headlamps fail to function, have your headlamp system checked right away. Windshield Wiper Fuse The windshield wiper motor is protected by a circuit breaker and a fuse. If the motor overheats due to heavy snow, etc., the wiper will stop until the motor cools.
  • Page 297 Instrument Panel Fuse Block The fuse panel is located at the left end of the instrument panel. To open, push the tab on the access door to the left and pull the door forward. Make sure to insert the tabs when replacing the cover. Fuse Usage Exterior Lamps, Back...
  • Page 298 Fuse Usage Rear O Sensor Heater WIPER Windshield Wipers, Windshield Washers ERLS Automatic Transaxle, Brake Transaxle Shift Interlock (BTSI), A/C Compressor, Cruise Control, Multiport Fuel Injection AIR BAG Supplemental Inflatable Restraint (SIR) System PWR ACC Power Door Locks, Convertible Top (Convertible Model Only) EXT LAMP Exterior Lamps, Instrument Panel Lights...
  • Page 299 Engine Compartment Fuse Block The engine compartment fuse block is located on the driver’s side of the engine compartment. Lift off the cover to check the fuses. Fuse Usage Ignition Switch Circuits BATT 1 Power ACC/Stoplamp Circuits BATT 2 Lighting Circuits Anti Lock Brake System COOLING FAN...

  • Page 300: Capacities And Specifications

    Replacement Bulbs Lamps ......Back Up Lamps ......Front Parking/Turn Signal Lamps Base Model .

  • Page 301: L Engine Specifications

    2.2L Engine Specifications VIN Engine Code ......Type ........Horsepower .

  • Page 302: Vehicle Dimensions

    Vehicle Dimensions Length All Models ....180.3 inches (458.0 cm) Width All Models ....75.4 inches (191.5 cm) Height Coupe...

  • Page 303: Section 7 Maintenance Schedule

    Section 7 Maintenance Schedule This section covers the maintenance required for your vehicle. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction Part A: Scheduled Maintenance Services Short Trip/City Scheduled Maintenance Long Trip/Highway Scheduled Maintenance Part B: Owner Checks and Services Part C: Periodic Maintenance Inspections Part D: Recommended Fluids and Lubricants...

  • Page 304: Your Vehicle And The Environment

    Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet, or your dealer for details. Introduction Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment.

  • Page 305: How This Section Is Organized

    How This Section is Organized This maintenance schedule is divided into five parts: “Part A: Scheduled Maintenance Services” shows what to have done and how often. Some of these services can be complex, so unless you are technically qualified and have the necessary equipment, you should let your dealer’s service department or another qualified service center do these jobs.

  • Page 306: Using Your Maintenance Schedule

    Part A: Scheduled Maintenance Services Using Your Maintenance Schedule We at General Motors want to help you keep your vehicle in good working condition. But we don’t know exactly how you’ll drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather.

  • Page 307: Scheduled Maintenance

    Scheduled Maintenance Short Trip/City Definition Follow the Short Trip/City Scheduled Maintenance if any one of these conditions is true for your vehicle: Most trips are less than 5 to 10 miles (8 to 16 km). This is particularly important when outside temperatures are below freezing.
  • Page 308 Scheduled Maintenance Short Trip/City Intervals Every 100,000 Miles (166 000 km): Spark Plug Wire Inspection. Spark Plug Replacement. Every 150,000 Miles (240 000 km): Cooling System Service (or every 60 months, whichever occurs first). These intervals only summarize maintenance services. Be sure to follow the complete scheduled maintenance on the following pages.

  • Page 309: Short Trip/City Scheduled Maintenance

    Short Trip/City Scheduled Maintenance The services shown in this schedule up to 100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals. The services shown at 150,000 miles (240 000 km) should be performed at the same interval after 150,000 miles (240 000 km).
  • Page 310 Short Trip/City Scheduled Maintenance 3,000 Miles (5 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 6,000 Miles (10 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 311 Short Trip/City Scheduled Maintenance Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote ++.) 15,000 Miles (25 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 312 Short Trip/City Scheduled Maintenance 24,000 Miles (40 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 313 Short Trip/City Scheduled Maintenance Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed. An Emission Control Service. (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 314 Short Trip/City Scheduled Maintenance 39,000 Miles (65 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 42,000 Miles (70 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 315 Short Trip/City Scheduled Maintenance Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote ++.) 50,000 Miles (83 000 km) Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions:...
  • Page 316 Short Trip/City Scheduled Maintenance 54,000 Miles (90 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 317 Short Trip/City Scheduled Maintenance Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed. An Emission Control Service. (See footnote Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 318 Short Trip/City Scheduled Maintenance 69,000 Miles (115 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 72,000 Miles (120 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 319 Short Trip/City Scheduled Maintenance 78,000 Miles (130 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 320 Short Trip/City Scheduled Maintenance 87,000 Miles (145 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 90,000 Miles (150 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 321 Short Trip/City Scheduled Maintenance 93,000 Miles (155 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 96,000 Miles (160 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
  • Page 322 Short Trip/City Scheduled Maintenance 100,000 Miles (166 000 km) Inspect spark plug wires (except 2.4L Code T L4 engine). An Emission Control Service. Replace spark plugs. An Emission Control Service. Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: –...

  • Page 323: Long Trip/Highway Scheduled Maintenance

    Long Trip/Highway Scheduled Maintenance The services shown in this schedule up to 100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals. The services shown at 150,000 miles (240 000 km) should be performed at the same interval after 150,000 miles (240 000 km).
  • Page 324 Long Trip/Highway Scheduled Maintenance 7,500 Miles (12 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 325 Long Trip/Highway Scheduled Maintenance Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) 30,000 Miles (50 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service.
  • Page 326 Long Trip/Highway Scheduled Maintenance 37,500 Miles (62 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 327 Long Trip/Highway Scheduled Maintenance – In hilly or mountainous terrain. – When doing frequent trailer towing. – Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of these conditions, the fluid and filter do not require changing.
  • Page 328 Long Trip/Highway Scheduled Maintenance 60,000 Miles (100 000 km) (Continued) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote ++.) Inspect engine accessory drive belt. An Emission Control Service. Replace air cleaner filter.
  • Page 329 Long Trip/Highway Scheduled Maintenance 75,000 Miles (125 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
  • Page 330 Long Trip/Highway Scheduled Maintenance 90,000 Miles (150 000 km) (Continued) Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Replace air cleaner filter. An Emission Control Service. Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage.
  • Page 331 Long Trip/Highway Scheduled Maintenance 100,000 Miles (166 000 km) Inspect spark plug wires (except 2.4L Code T L4 engine). An Emission Control Service. Replace spark plugs. An Emission Control Service. Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: –...

  • Page 332: At Least Once A Month

    Part B: Owner Checks and Services Listed in this part are owner checks and services which should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Be sure any necessary repairs are completed at once. Whenever any fluids or lubricants are added to your vehicle, make sure they are the proper ones, as shown in Part D.

  • Page 333: At Least Twice A Year

    It is not necessary to check the transaxle fluid level. A transaxle fluid leak is the only reason for fluid loss. Check for leaks. If a leak occurs, take the vehicle to your Chevrolet dealership Service Department and have it repaired as soon as possible. Hydraulic Clutch System Check Check the fluid level in the clutch reservoir.
  • Page 334 At Least Once a Year Key Lock Cylinders Service Lubricate the key lock cylinders with the lubricant specified in Part D. Body Lubrication Service Lubricate all hood latch assemblies, secondary latch, pivots, spring anchor, release pawl, hood and body door hinges, rear compartment and any folding seat hardware.
  • Page 335 Brake Transaxle Shift Interlock (BTSI) Check (Automatic Transaxle) CAUTION: When you are doing this check, the vehicle could move suddenly. If it does, you or others could be injured. Follow the steps below. 1. Before you start, be sure you have enough room around the vehicle.
  • Page 336 Parking Brake and Automatic Transaxle PARK (P) Mechanism Check CAUTION: When you are doing this check, your vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of your vehicle in case it begins to roll.

  • Page 337: Engine Cooling System Inspection

    Part C: Periodic Maintenance Inspections Listed in this part are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your dealer’s service department or other qualified service center do these jobs.

  • Page 338: Throttle System Inspection

    Throttle System Inspection Inspect the throttle system for interference or binding, and for damaged or missing parts. Replace parts as needed. Replace any components that have high effort or excessive wear. Do not lubricate accelerator and cruise control cables. Brake System Inspection Inspect the complete system.

  • Page 339: Part D: Recommended Fluids And Lubricants

    Part D: Recommended Fluids and Lubricants NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. USAGE FLUID/LUBRICANT Engine Oil Engine Oil with the American Petroleum Institute Certified For Gasoline Engines “Starburst” symbol of the proper viscosity.
  • Page 340 USAGE FLUID/LUBRICANT Clutch Linkage Engine Oil. Pivot Points Chassis Chassis Lubricant (GM Part Lubrication No. 12377985 or equivalent) or lubricant meeting requirements of NLGI # 2, Category LB or Hood Latch Lubriplate Lubricant Aerosol Assembly, (GM Part No. 12346293 or Secondary Latch, equivalent) or lubricant meeting Pivots, Spring...

  • Page 341: Part E: Maintenance Record

    Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. ODOMETER DATE SERVICED BY READING Any additional information from “Owner Checks and Services”...
  • Page 342 yellowblue Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-40...

  • Page 343: Section 8 Customer Assistance Information

    Section 8 Customer Assistance Information Here you will find out how to contact Chevrolet if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Customer Satisfaction Procedure Customer Assistance for Text Telephone...

  • Page 344: Customer Satisfaction Procedure

    Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
  • Page 345 Dealership name and location Vehicle delivery date and present mileage When contacting Chevrolet, please remember that your concern will likely be resolved at a dealer’s facility. That is why we suggest you follow Step One first if you have a concern.

  • Page 346: Customer Assistance For Text Telephone

    Customer Assistance Offices free telephone Chevrolet encourages customers to call the toll-free number for assistance. If a U.S. customer wishes to write to Chevrolet, the letter should be addressed to Chevrolet’s Customer Assistance Center. United States Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.

  • Page 347: All Overseas Locations

    Canada General Motors of Canada Limited Customer Communication Centre, 163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 1-800-263-3777 (English) 1-800-263-7854 (French) 1-800-263-3830 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-268-6800 All Overseas Locations GMODC Customer Communication Centre 169-007 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 Telephone: 905-644-4112 Fax:...

  • Page 348: Chevrolet Roadside Assistance Program

    To enhance Chevrolet’s strong commitment to customer satisfaction, Chevrolet is excited to announce the establishment of the Chevrolet Roadside Assistance Center. As the owner of a 1999 Chevrolet, membership in Roadside Assistance is free. Roadside Assistance is available 24 hours a day,...

  • Page 349: Canadian Roadside Assistance

    Courtesy Transportation will be offered in conjunction with the coverage provided by the Bumper to Bumper New Vehicle Limited Warranty to eligible purchasers of 1999 Chevrolet passenger cars and light duty trucks. (Please see your selling dealer for details.)

  • Page 350: Transportation Options

    Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait Chevrolet helps minimize your inconvenience by providing several transportation options. Depending on the circumstances,...

  • Page 351: Additional Program Information

    Courtesy Rental Vehicle When your vehicle is unavailable due to overnight warranty repairs, your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle you obtained, at actual cost, up to a maximum of $30.00 per day supported by receipts.

  • Page 352: Reporting Safety Defects To The United

    REPORTING SAFETY DEFECTS TO THE UNITED STATES GOVERNMENT If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA), in addition to notifying General Motors.

  • Page 353: Reporting Safety Defects To General Motors

    Please call us at 1 1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 7047 Troy, MI 48007 7047 In Canada, please call us at 1 or 1 7854 (French).
  • Page 354 1999 CHEVROLET SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing of your vehicle can be purchased by filling out the Service Publication Order Form in this book and mailing it in with your check, money order, or credit card information to Helm, Incorporated (address below.)
  • Page 355 ORDER TOLL FREE (NOTE: For Credit Card Holders Only) 1-800-551-4123 (Monday-Friday 8:00 AM – 6:00 PM EST) FAX Orders Only 1-313-865-5927 PUBLICATION FORM PUBLICATION FORM NUMBER NUMBER Service Manual Car & Light Truck Transmission Unit Repair Owner’s Manual In Portfolio Owner’s Manual Without Portfolio NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention the shipment should be sent.
  • Page 356 yellowblue NOTES 8-14...

  • Page 357: Section 9 Index

    Section 9 Index ccessory Power Outlet ......Adapter Kit, CD ......Adding Equipment to the Outside of Your Vehicle Air Bag .
  • Page 358 Brake ........Adjustment Fluid ........Master Cylinder .
  • Page 359 Interior Plastic Components ..........Outside of Your Vehicle Special Problems .
  • Page 360 Driving ........City Defensive .
  • Page 361 Finish Damage ..........First Gear, Automatic Transaxle First Gear, Manual Transaxle .
  • Page 362 Inspections ....... . Brake System Caliper/Knuckle ......Engine Cooling System .
  • Page 363 Interior ............. . Low Coolant Warning Oil Pressure .
  • Page 364 dometer ..............Odometer, Trip Road Recovery .
  • Page 365 Reclining Front Seatbacks ..........Recreational Vehicle Towing Refrigerants, Air Conditioning .
  • Page 366 Seats (Continued) ......Restraint Systems Seat Controls ....... . . Securing a Child Restraint .
  • Page 367 Third Gear, Automatic Transaxle ........Third Gear, Manual Transaxle Tilt Steering Wheel .
  • Page 368 TTY Users ........... . Turn Signal and Lane Change Signals Turn Signal/Multifunction Lever .

Table of Contents

Save PDF