Table of Contents
Advertisement
If the disc player is very hot, or if you're driving on
a
very rough road, a
disc may come out or just not play. If you see the word Err
on
the display,
the disc player is too hot
to
play the disc. Press RECALL to make the word
Err go off the display.
When things get back to normal, the disc should play again. If the disc
comes back out, check whether:
The disc
is
upside down.
It
is
dirty, scratched, or wet.
Too much moisture is in the air. (If there
IS,
wait about one hour and try
again.)
RECALL - Press RECALL to see what track is playing. Press it again
within 5 seconds to see how long the CD has been playing that track.
Elapsed time is displayed in minutes and tenths
of
a second. The track
number will
also
appear when a new track begins to play. Press RECALL
again to return to the time display.
COMP
-
Press the COMP button to make
soft
and loud passages more
nearly equal in volume. "COMP' will appear in the display while using this
control.
PREV (1) - Press PREV or
4
SEEK to search for the previous selection,
If you hold this button or press it more than once, the disc will advance
further. PREV will appear in the display.
RDM ( 2 ) - Press RDM to play the tracks
on the
disc in random (instead of
1,2, 3 ...) order. While in the RDM mode, RANDOM appears in the display.
Press RDM again to return to normal play.
NEXT (3)
-
Press NEXT or SEEK
to search for the next selection. If
you hold this button or press
it more than once, the disc will advance
further. NEXT will appear in the display.
REV (4)- Press and hold REV to return rapidly to a favorite passage. You
will hear the disc selection play at high speed while you press the REV
button. This allows you to listen and find out when the disc is at the desired
selection passage. Release REV to resume playing.
00
(5)- Press
00
to reduce tape noise
f a
remote cassette player is
used. The
00
symbol will appear in the display while the player is in this
mode.
FWD (6)- Press and hold FWD to advance rapidly within a track. You will
hear the disc selection play at high speed while you press the FWD button.
This allows you to listen and find out when the disc is at the desired
selection passage. Release FWD to resume playing.
CD AUX
-
To switch between the player and the radio when a disc is
playing, press the AMFM button. To return to the player, press CD AUX.
3-22
Advertisement
Table of Contents
