Page 1 1 9 9 4 A S T R O V A N O W N E R ’ S M A N U A L...
Page 3 Chevrolet Truck Warranty and Owner Assistance Information booklet. Thanks for choosing a Chevrolet product. We value you as a member of the Chevrolet family. We want to assure you of our continuing interest in your pleasure and satisfaction with your vehicle.
Page 4 DGN Marketing Services Ltd., 1500 Bonhill Rd., Mississauga, Ontario L5T 1C7. General Motors, GM and the GM Emblem, Chevrolet and the Chevrolet Emblem, and ASTRO are registered trademarks of General Motors Corporation.
Page 5 Model Reference This manual covers these models: Passenger Model Cargo Model...
Page 6: Table Of Contents
Table of Contents Introduction How to Use this Manual This section tells you how to use your manual and includes safety and vehicle damage warnings and symbols. Section 1 Seats and Safety Restraints This section tells you how to use your seats and safety restraints properly.
Page 7: How To Use This Manual
How to Use This Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. This will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly.
Page 8 Safety Warnings and Symbols You will find a number of safety cautions in this book. We use a box with gray background and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. In the gray caution area, we tell you what the hazard is.
Page 9 Vehicle Damage Warnings Also, in this book you will find these notices: NOTICE: These mean there is something that could damage your vehicle. In the notice area, we tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly.
Page 10 These symbols are important you and your passengers whenever your vehicle is driven: Fasten Safety Door LocWUnlock Belts These symbols have to do with your lights: Master Lighting Turn Signal Hazard Warning Headlight wifc h Direction Flasher High Beam Fog Lights Daytime Parking Lights Running Lights...
Page 11 These symbols are on some of your controls: Windshield Windshield Hood Release Windshield Wiper Washer Defroster Ventilating Fan Rear Window Rear Window Hatch Wiper & Washer Defogger Release These symbols are used on warning and indicator lights: Engine Coolant Battery Charging Engine Fuel Temperature...
Page 12 Here are some other symbols you may see: Fuse Horn Lighter Speaker...
Page 13 Seats and Safety Belts Here you’ll find information about the seats in your vehicle and how to use your safety belts properly not do with safety belts Seats and Seat Controls ..........Frontseats .
Page 14: Seats And Seat Controls
Seats and Seat Controls This section tells you about the seats-how to adjust them, take them out and put them back in. It also tells you about bucket and bench seats, power seats, and head restraints. Front Seats Manual Front Seat Slide the lever at the front of the seat to the left to unlock it.
Page 15 Power Driver's Seat You can adjust the seat before entering the vehicle. Reclining Bucket Seats If you have this feature, you will have either a knob or a lever on the inside of the seat to adjust the seatback. The front control makes the front seat go up and down.
Page 16 Don’t adjust the driver’s seatback while your vehicle Don’t have a seatback reclined if your vehicle is moving. If you have the lever, you can adjust the seatback by lifting the lever. Release the lever to lock the seat back where you want it.
Page 17: Rear Seats
Rear Seats Bucket Seats If you have rear bucket seats in your vehicle, they will recline and adjust the same way as the front manual bucket seats. See “Front Seats” earlier in this section or in the Index. Bench Seats If you have bench seats in your vehicle, each seat can carry up to three passengers.
Page 18 adjust seatback, pull up the lever on the lower outside of the seat. The center bench seatbacks will recline further back than the rear bench seatbacks. To raise or lower the center console, press the button between the beverage holders. Only sit in the center seating position when the console is in an...
Page 19 Seatback Latches (Non-Touring Bench Seats) After the latch has been released, push the seatback down until it locks in place. To raise the seatback, unlock the seat by pushing forward on the lever. Make sure the seatback is locked when it is put back in the upright position.
Page 20 TO DETACH BELTFOR SEAT REMOVAL 5. Lift up on the seat release latch. The latches are near the floor on the rear legs of the seat. To relieve pressure on the latch, pull back on the seat. 2. If you are removing the center seat, remove the right...
Page 21 To Install The Seat Make sure the seat is locked in by pulling up and down on the seat. 6. Lift up on the rear of the seat to remove the seat assembly from the rear latch pins. Then, pull back and lift the seat out of the vehicle.
Page 22: Head Restraints
3. Attach the quick release latch plate to the buckles in the roof. If you are installing the center seat, connect the right lapshoulder belt to the attachment on the seat cushion. If you have a safety belt guide on your seat, pull the belt through the guide before reattaching the lapshoulder belt to the side of the seat.
Page 23: Safety Belts: They're For Everyone
Safety Belts: They’re For Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Inflatable Restraint, This figure lights up as a reminder to buckle up. (See “Safety Belt Reminder Light”...
Page 24: Why Safety Belts Work
After more than years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. lot! For example, if the bike is going 10 mph km/h), 1-12...
Page 25 When the bike hits the block, it stops. But the child keeps going! Put someone on it. 1-13...
Page 26 Get it up Then stop the vehicle. The rider doesn't stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield the instrument panel 1-14 to speed..
Page 27 With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. Here Are Questions Many People Safety Belts Won’t I be trapped in the vehicle after an accident safety belt?
Page 28: Safety Belt Reminder Light
good driver doesn’t protect such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone. Safety Belt Reminder Light When the key is turned eight seconds to remind people to fasten their safety belts.
Page 29: Driver Position
Driver Position This section describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat (to see how, see “Seats” in the Index) so you can sit up straight.
Page 30 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the releas6 button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 31 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 32 You can move the adjuster up from a lower position just by pushing up on it. To move it down, push in the adjuster at the arrows and pull down on the adjuster. After you move the adjuster to where you want it, try to move it up and down to make sure it is locked into...
Page 33 What’s wrong with this? The shoulder belt is too loose. It won’t give nearly as much protection this way. 1-21...
Page 34 What’s wrong with this? The belt is over an armrest. 1-22...
Page 35 What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 1-23...
Page 36 What's wrong with this? The belt is twisted across the body. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 37: Driver's Facial Air Bag System
Driver’s Facial Air Bag System This section explains the Driver’s Facial Air Bag system. Here are the most important things to know: 1-25...
Page 38 Air Bag System Light There is an air bag readiness light on the instrument panel, which shows AIR BAG The system checks for electrical malfunctions, and the light tells you if there is a problem. Remember, if the air bag readiness light doesn’t come on when you start your vehicle, or stays on, or comes on when you are driving, your air bag system may not work properly.
Page 39 How The Air Bag Where is the air bag? The Driver's Facial Air Bag is in the middle of the steering wheel. When is an air bag expected to inflate? The air bag is designed to inflate in moderate to severe frontal or near-frontal crashes.
Page 40 How does an air bag restrain? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the steering wheel. The air bag supplements the protection provided by safety belts. Air bags distribute the force of the impact more evenly over the occupant’s upper body, stopping more gradually.
Page 41: Safety Belt Use During Pregnancy
is the smoke from an air The particles emitted during air bag inflation are not harmful people. Some people with respiratory ailments may experience difficulty breathing if they stay in the vehicle with the windows closed inflation. So, if your air bag inflates, you and any passengers should exit the vehicle if and when it is safe to do so.
Page 42: Right Front Passenger Position
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 43: Rear Seat Outside Passenger Positions
Rear Seat Outside Passenger Positions Lap-Shoulder Belt These positions have lap-shoulder belts. Here’s how to wear one properly. 2. Push the latch plate into the buckle until it clicks. If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it.
Page 44 The lap part of the belt should be worn low and snug touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 45 To unlatch the belt, just push the button on the buckle. 1-33...
Page 46: Center Passenger Positions
Center Passenger Position (Bench Seat) Lap Belt if your vehicle has rear bench seats, someone can sit in the center positions. 1-34...
Page 47: Children
Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 48: Smaller Children And Babies
Smaller Children and Babies 1-36...
Page 49: Child Restraints
Child Restraints Be sure to follow the instructions for the restraint. You may find these instructions on the restraint itself or in use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury. The instructions that come with the infant or child restraint will show you how to do that.
Page 50 Top Strap If you need to have an anchor installed, you can ask your GM dealer to put it in for you. If you want to install an anchor yourself, your dealer can tell you how to do it. Securing a Child Restraint in a Rear Outside Position You’ll be using the lap-shoulder belt.
Page 51 4. Run the lap and shoulder portions through or around the restraint. The child restraint instructions will show you how. If the shoulder belt goes the child’s face or neck, put it behind the child restraint. 5 . Buckle the belt. Make sure the release button is positioned so you...
Page 52 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Center Rear Seat Position When you secure a child restraint in a center seating position, you’ll be using the lap belt.
Page 53 Put the restraint on the seat. Follow the instructions for the child restraint. Secure the child in the child restraint as the instructions say. Run the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 6 .
Page 54 Securing Child Restraint You’ll be using the lap-shoulder belt. See the earlier section about the top strap if the child restraint has one. 1. Put the restraint on the seat. Follow the instructions for the child restraint. 2. Secure the child in the child restraint as the instructions say. 3.
Page 55 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready larger child passenger. 5. Press the button on the retractor cover to set the lock.
Page 56: Larger Children
Larger Children Children who have outgrown child restraints should wear the vehicle's safety belts. If you have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 57 What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide.
Page 58: Safety Belt Extender
Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child's thighs. This applies belt force to the child's pelvic bones in a crash. Safety Belt Extender If the vehicle's safety belt will fasten around you, you should use it. But if a safety belt long enough to fasten, your dealer will order you an isn't...
Page 59: Checking Your Restraint Systems
Checking Your Restraint Systems Now and then, make sure all your belts, buckles, latch plates, retractors, anchorages and reminder systems are working properly. Look for any loose parts or damage. If you see anything that might keep a restraint system from doing its job, have it repaired.
Page 60 The model number on the replacement belt must be listed on the safety belt you want to replace. Pull the shoulder belt all the way out to see this label. 1-48...
Page 61: Features & Controls
Features & Controls Here you can learn about the many standard and optional features on your vehicle. and information on starting. shifting. and braking are the instrument panel and the warning systems that tell you if everything is working properly- and what to do if you have a problem For explanation of vehicle symbols.
Page 62 All-Wheel Drive (Option) Windows Horn Tilt Wheel (Option) Turn SignaVMultifunction Lever Turn Signal and Lane Change Indicator Headlight High-Low Beam Windshield Wipers Windshield Washer Rear Window WiperNasher Cruise Control Lights Mirrors SunVisors Cigarette LighterlAshtrays Assist Handles Storage Compartments Instrument Cluster Warning Lights, Gages and Indicators Indicator Lights Gages...
Page 63: Keys
Keys...
Page 64 When a new vehicle is delivered, the dealer removes the plugs from the keys, and gives them to the first owner. Each plug has a code on it that tells your dealer or a qualified locksmith how to make extra keys. Keep the plugs in a safe place. If you lose your keys, you’ll able to have new ones made easily using these plugs.
Page 65: Your Doors And How They Work
Your Doors and How They Work Side Doors To open the front side door from the outside, grasp the handle and pull the door open. To open the front side door from the inside, pull the lever toward you and push the door open.
Page 66 SIiding Side Door To open the sliding side door, pull the handle toward the back and slide the door to the rear until it latches in the open position. To close the sliding side door, pull the handle toward the front to release the rear latch, and slide the door forward.
Page 67 Rear Doors To close the rear doors, close the left door first. Check to make sure both doors are completely closed. The rear doors have a check assembly to keep the doors from opening beyond 90". open the left rear door, pull on the latch release handle in the inside of the door.
Page 68: Doorlocks
See the caution under “Swing-Out Windows” in this section. Door Locks To fully open the ’ doors, push in clip and lift the check assembly up off the mounting bracket. Do this on each door. Replace the assemblies the same way.
Page 69 There are several ways to lock and unlock your vehicle: Rear doors cannot be manually locked from the inside .. . From the inside: To lock front doors and sliding side door, slide the lock levers down. To unlock the front doors and the sliding side door from the inside: Slide the lock...
Page 70 Power Door Locks The Power Door Lock switch will not lock or unlock the rear hatch and split panel doors. You must use the HATCH REL switch. See “Hatch Release Switch” in the Index. Every vehicle with power door locks has a pulse lock system. A pulse lock system works like this: If the sliding door is open and you push the power door lock switch, the sliding door will not lock immediately.
Page 71: Theft
The hatch and doors will automatically lock when the hatch is shut. If the hatch is partially closed, the rear doors will lock and you will need to use the key or HATCH column, to unlock them. (See also Hatch Release Switch, Rear WiperNasher, and Rear Defogger in the Index.) Theft Vehicle theft is big business, especially in some cities.
Page 72: New Vehicle "Break-In
Key in the Ignition If you walk away from your vehicle with the keys inside, it’s an easy target for joy riders or professional thieves When you park your vehicle and open the driver’s door, you’ll hear a chime reminding you to remove your key from the ignition and take it with you. Always do this.
Page 73: Ignition Switch
Ignition Switch Use your ignition key to start your vehicle. The ignition key lets the ignition switch to five different positions. ACC (Accessory): ACC lets you use things like the radio and the windshield wipers when the engine is off. To get into ACC, push in the key and turn it toward you.
Page 74 NOTICE: If your key seems stuck in LOCK and you can’t turn it, be sure it is all the way in. If it is, then turn the steering wheel left and right while you turn the key hard. But turn the key only with your hand.
Page 75: Fuelregulator
3. If your engine still won’t start (or starts but then stops), it could be flooded with too much gasoline. Try this: Wait 15 seconds to let the starter motor cool down. Then push your accelerator pedal all the way to the floor. Hold it there. Then, hold the key in START for no more than ten seconds.
Page 76 Engine Coolant Heater (Engine Block Heater) (Option) In very cold weather, 0°F (-1 8 "C) or colder, the engine coolant heater can help. You'll get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle.
Page 77: Automatic Transmission
How long should you keep the coolant heater plugged in? The answer depends on the weather, the kind of oil you have, and some other things. Instead of trying to list everything here, we ask that you contact a GM dealer in the area where you’ll be parking your vehicle.
Page 78 Ensure the shift lever is fully in Your vehicle has brake-transmission shift interlock. You have to fully apply your regular brakes before you can shift from “P” (Park) when the ignition key is in the RUN position. If you cannot shift out of ease pressure on the shift lever - push the shift lever all the way into “P”...
Page 79 (Overdrive) This position is for normal driving. If you need more power for passing, and you’re: Going less than about 35 mph (56 k d h ) , push your accelerator pedal about halfway down. Going about 35 mph (56 k d h ) or more, push the accelerator pedal all the way down.
Page 80: Locking Rear Axle
Locking Rear Axle If you have this feature, your rear axle can give you additional traction snow, mud, ice, sand or gravel. It works like a standard axle most of the time, but when one of the rear wheels has no traction and the other does, the locking feature will allow the wheel with traction to move the vehicle.
Page 81 If you are on a hill: See “Parking on Hills” in the Index. That section shows how to turn your front wheels. If you are towing a trailer and are parking on any hill: See “Towing a Trailer” in the Index. That section shows what to do first to keep the trailer from moving.
Page 82: Shifting Out Of "P" (Park)
Leaving Your Vehide With the Engine Running If you have to leave your vehicle with the engine running, be sure your vehicle is in “P” (Park) and your parking brake is firmly set before you leave it. After you’ve moved the shift lever into the “P” hold the regular brake pedal down.
Page 83: Parking Over Things That Burn
Torque Lock If you are parking on a hill and you don’t shift your transmission into (Park) properly, the weight of the vehicle may put too much force on “ I ? ’ the parking pawl in the transmission. You may find it difficult to pull the “P”...
Page 84: Engineexhaust
Engine Exhaust Running Your Engine While You’re Parked It’s better not to park with the engine running. But if you ever have to, here are some things to know. 2-24...
Page 85 Follow the proper steps to be sure your vehicle won’t move. See “Shifting Into ‘P’ (Park)” in the Index. If you’re pulling a trailer, see “Towing a Trailer” in the Index. 2-25...
Page 86: All-Wheel Drive (Option)
All- Wheel Drive (Option) If your vehicle has all-wheel drive, your engine’s driving power is sent to all four wheels for extra traction. Windows This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle.
Page 87 Swing-Out Windows If you have optional power windows, the controls are on each of the front side doors. The driver’s door has a switch for the front passenger window as well. Your power windows will not move unless the ignition has been RUN.
Page 88 Hatch Release Switch The vehicle must be in “P’ unlock the split-panel doors. The hatch will release with or without the key in the ignition. (Park) or (Neutral) to release the hatch and “ N ’ 2-28 This switch is to the left of the steering column.
Page 89: Horn
Horn Tilt Wheel (Option) You can also raise it to the highest level to give your legs more room when you exit and enter the vehicle. To tilt the wheel, hold the steering wheel and pull the lever. Move the steering wheel to a comfortable level, then release the lever to lock the wheel in place.
Page 90: Turn Signal And Lane Change Indicator
The Turn SignaYMultifunction Lever The lever on the left side of the steering column includes your: Turn Signal and Lane Change Indicator Headlight High-Low Beam Windshield Wipers Windshield Washer Cruise Control (Option) Turn Signal and Lane Change Indicator To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically.
Page 91 ‘ I To signal a lane change, just raise or lower the lever until the green arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrows don’t flash but just stay on, a signal bulb may be burned out and other drivers won’t see your turn signal.
Page 92: Headlight High-Low Beam
Headlight High-Low Beam Windshield Wipers To change the headlights from low beam to high or high to low, pull the turn signal lever all the way toward you. Then release it. When the high beams are on, this blue indicator light on the instrument panel also will be on.
Page 93: Windshield Washer
For a single wiping cycle, turn the band to MIST. Hold it there until the wipers start, then let go. The wipers will stop after one cycle. If you want more cycles, hold the band on MIST longer. You can set the wiper speed for can be very useful in light rain time.
Page 94 NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water doesn’t clean well as washer fluid.
Page 95: Cruise Control
Press the top of the switch to the first position to turn on the wiper. Press the top of the switch in all the way and hold to release the desired amount of washer fluid. The wipers will continue to work after you release the switch.
Page 96 To Set Cruise Control Get up to the speed you want. Push in the set button at the end of the lever and release it. Take your foot off the accelerator pedal. Move the Cruise Control switch to 2-36...
Page 97 To Resume a Set Speed Suppose you set your Cruise Control at a desired speed and then you apply the brake. This, of course, shuts off the Cruise Control. But you don’t need to reset it. Once you’re going about 25 mph (40 k d h ) or more, you can move the Cruise Control switch from ON to R/A (Resume/Accelerate) and hold it for about half a second.
Page 98 To Increase Speed While Using Cruise Control While your cruise control switch is in the ON position, here are two ways to go to a higher speed. Here’s the first: Use the accelerator pedal to get to the higher speed. Push the button at the end of the lever, then release the button and the accelerator pedal.
Page 99 To Reduce Speed While Usina Cruise Control To slow down in very small amounts, push the button for less than half a second. Each time you do this, you’ll go 1 mph (1.6 km/h) slower. Passing Another Vehicle While Using Cruise Control ‘r;...
Page 100 To Get Out of Cruise Control There are two ways to turn off the Cruise Control: Step lightly on the brake pedal. Move the Cruise OFF. switch to To Erase Speed Memory When you turn the Cruise Control or the ignition, your Cruise Control set speed memory is erased.
Page 101: Lights
Lights Press the top light switch to the left Parking Lights Taillights License Plate Lights Instrument Panel Lights Press the bottom light switch to the left to turn on the headlights, together with: Parking Lights Taillights License Plate Lights Instrument Panel Lights Press OFF to turn off all your lights.
Page 102 Fog Lamps Slide the right side of the switch to turn the fog lamps on, and the left side of the switch to turn them off. A warning light in the switch will remind you that your fog lights are on. Remember, fog lamps alone will not give off as much light as your headlights.
Page 103 Daytime Running Lights (DRL) indicator Light (Canada Only) If your vehicle was first sold, when new, in Canada, you will have this light on the instrument panel. It goes on whenever the Daytime Running Lights are on, the ignition is on, the headlamp switch is off, and the parking brake is released.
Page 104 Headlights-On Reminder If you have this option, a reminder tone will sound when your headlights turned on and your ignition is in OFF, LOCK or ACC. To turn the tone off, press the OFF switch. Dome Lights Reading Lights You can adjust the lights to any desired position by rotating the lamp and they will work when the ignition is on or off.
Page 105: Mirrors
Interior Lights Override Switch If the switch is OFF, the interior lights will not come on when any of the vehicle doors are open. It is on the instrument panel above the radio. If you have the optional reading lamps, they will still operate if the switch is in the OFF position.
Page 106 Outside Mirrors Your outside mirrors can also be folded in or out. Push the mirror towards the vehicle to move it in. After pushing the mirror out, adjustment will maintained. :::q ..2-46 You can also adjust the mirror for day or night driving.
Page 107: Sunvisors
To move a mirror, slide the switch to L for the driver’s side mirror or to for the passenger’s side mirror. Then, press the four-way pad to move the mirror in the desired direction. To make sure you do not accidentally move a mirror, slide the switch to the middle (off) position.
Page 108: Cigarette Lighterlashtrays
Cigarette Lighter/Ashtrays Don’t hold a cigarette lighter in with your hand while it is heating. If you do, it won’t be able to back away from the heating element when it’s ready. That can make it overheat, damaging the lighter and the heating element. The optional cigarette lighter is on the left of the engine cover...
Page 109: Assist Handles
Don’t put papers and other things that burn into your ashtrays. If you do, cigarettes or other smoking materials could set them on fire, causing damage. Assist Handles Assist handles are located on the inside front and center vehicle pillars. To remove the smaller ashtrays on each sidewall, press down...
Page 110: Storage Compartments
Storage Compartments Your front storage compartment is at the center of the engine cover. To open the compartment, press the two tabs together and pull. If you have an optional sliding tray storage compartment, it is under the front passenger seat. To open the compartment, slide the latch in the top handle...
Page 111: Instrument Cluster
Center Overhead Console Instrument Cluster Your instrument cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel remains, and many other things you’ll need to know to drive safely and economically.
Page 112 Instrument Panel 1. Light Switches 2. Dimmer Switch Instrument Cluster 4. Gearshift Lever 5 . Air ConditionedHeater 6. Fog Light Switch 7. Remote Outside Mirror Switch 8. Rear Heater Switch 9. Rear A/C Switch 10. Interior Light Override Switch 11. Audio System 12.
Page 113 Speedometer and Odometer Standard Cluster Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour ( k d h ) . Your odometer shows how far your vehicle has been driven, in either miles (used in the U S . ) or kilometers (used in Canada).
Page 114 The digital odometer will read You may wonder what happens if your vehicle needs a new odometer installed. If the new one can be set to the mileage total of the old odometer, then it must be. But if it can’t, then it’s set at zero, and a label must be put on the driver’s door to show the old mileage reading when the new odometer was installed.
Page 115: Warning Lights, Gages And Indicators
Warning Lights, Gages and Indicators This section describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to your warning lights and gages could also save you or others from injury.
Page 116 If the warning light comes on, there could be a brake problem. Have your brake system inspected right away. This light should come on as you start the vehicle. If it doesn’t come on then, have it fixed so it will be ready to warn you if there’s a problem. If the light comes on while you are driving, pull off the road and stop carefully.
Page 117: Indicator Lights
If the light stays on, or comes on when you’re driving, your vehicle needs service. If the regular brake system warning light isn’t on, you still have brakes, but you don’t have anti-lock brakes. If the regular brake system warning light is also on, you don’t have anti-lock brakes and there’s a problem with your regular brakes.
Page 118 Malfunction Indicator Lamp (SERVICE ENGINE SOON) A computer monitors operation of your fuel, ignition and emission control systems. This light should come on when the ignition not running, as a check to show you it is working. If it does not come on at all, have it fixed right away.
Page 119 The charging system light will come on briefly when you turn the ignition on, but the engine is not running, as a check to show you the light is working. Then it should go out once the engine is running. If it stays on, or comes on while you are driving, you may have a problem with the electrical charging system.
Page 120 Daytime Running Lights (DRL) lndicator Light (Canadian Vehicles Only) The DRL indicator light is on the lower left of the standard cluster. If you have the digital cluster, it is on the top left. Headlight High Beam Indicator Light The light is on the left hand side of the standard cluster. If you have the digital cluster, it is on the top of the cluster.
Page 121: Gages
Turn Signal and Lane Change lndicator Turn signal arrows are at the top of the standard and digital clusters. For more details, see “Turn and Lane Change Signal’’ in this part. Gages Fuel Gage Standard Cluster The fuel gage tells you how much fuel you have remaining when the ignition is on.
Page 122 some Here are things owners ask about. None of these indicate a problem with your fuel gage: At the gas station, the gas pump shuts off before the gage reads The fuel tank will take either a little more or a little less fuel to fill up than the gage shows.
Page 123 NOTICE: Damage to your engine from neglected oil problems can be costly and is not covered by your warranty. Engine Coolant Temperature Gage Standard Cluster If you have the Standard Cluster, you have a gage that shows the engine coolant temperature. If the engine is too hot! It means that your engine coolant has overheated.
Page 124 HOT COOLANT CAN BURN YOU BADLY! In “Problems on the Road,” this manual shows what to Overheating” in the Index. Voltmeter Cluster Standard When your engine is not running, but the ignition is on (in the position), the gage shows your battery’s state of charge in DC volts. When the ignition is running, the gage shows the condition of the charging system.
Page 125: Luggagecarrier
Luggage Carrier NOTICE: Loading cargo that weighs more than 200 pounds (91 kg) on the luggage carrier may damage your vehicle. When you carry large things, never let them hang over the rear or the sides vehicle. Load your cargo so that it rests on the slats and does not scratch or damage the vehicle.
Page 126: Trailer Wiring
Trailer Wiring Harness If you have the optional trailering package, your vehicle will have a 7-wire harness. The 7-wire harness is stored on the right side of the van near the rear wheel well. This harness has a 30 amp battery feed wire and no connector, and should be wired by a qualified service person, Attach the harness to the trailer, then tape or strap it to your vehicle's frame rail.
Page 127 Notes...
Page 128 Notes...
Page 129: Comfort Controls & Audio Systems
Comfort Controls & Audio Systems In this section you’ll find out how to operate the comfort control and audio systems offered with your vehicle system supplied with your vehicle For explanation of vehicle symbols in this section. refer Symbols” in the Introduction Comfort Control Flow-Through Ventilation System .
Page 130: Flow-Through Ventilation System
Comfort Controk Flow-Through Ventilation System Your vehicle’s flow-through ventilation system supplies outside air to the inside of your vehicle when it is moving. With the will flow into the front air inlet grilles at the base of the windshield, through the vehicle and out the rear air exhaust valves.
Page 131 Air Vents If your vehicle doesn’t have air conditioning, there is an air vent in the right-hand kick panel below the instrument panel. The vent has a handle to open and close it. You will find air vents in the center and on the sides of your instrument panel.
Page 132: Heating System
Heating System Fan Lever The top lever has four positions. To increase the air flow, move the lever toward HIGH. To decrease the air flow, move it toward OFF. Temperature Lever The left lever lets you select the temperature of the air flowing into your vehicle.
Page 133: Heating/Air Conditioning System
Heating/Air Conditioning System If your vehicle has air conditioning, your heating/air conditioning system will look like this. Before using your vehicle's air conditioning, open the windows to clear the vehicle of hot air. Close the windows when using the system. Fan Lever The top lever has five positions.
Page 134: Rearheater
BI-LEV A/C: With this, outside air comes out through the heater floor vent and the instrument panel vents. If you move your temperature control lever between cold and hot, cooler air will come out of the upper vents while warmer air comes out of the floor vent. This setting is useful in cool weather with bright sunlight.
Page 135 If your vehicle has rear air conditioning, setting it on LOW may enhance front A/C performance by allowing trapped refrigerant in rear lines to circulate. The system will only send cooled air if the front system is on. It can still be used to recirculate air, even if the front system is off.
Page 136: Engine Coolant Heater
Engine Coolant Heater If you use the optional engine coolant heater before starting your engine, your heating system will produce warmer air faster to heat the passenger compartment in cold weather. See “Engine Coolant Heater” in the Index. Audio Systems Your Delco@ audio system has been designed to operate easily and give years of listening pleasure.
Page 137: How To Operate Your Etr@ Am Radio
NOTICE: Before you add any sound equipment to your tape player, CB radio, mobile telephone or two-way radio sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’s engine, Delco@ radio or other systems, and even damage them.
Page 138 BAL (Balance) The BAL control behind the upper knob moves the sound between the left and right speakers. The Lower Knob Turn the lower knob to choose radio stations. Tone Levers Two levers control the tone of your radio. BASS -Slide this lever up to increase the bass response. TREBLE -Slide this lever up to increase the treble response.
Page 139: How To Operate Your Etr@ Am-Fm Stereo Audio System
How to Operate Your ETW AM-FM Stel o Audio System This part tells you how your ETR@ AM-FM stereo audio system works: The Upper Knob The upper knob does these three things: It controls the volume. The VOL knob increases volume when rotated to the right.
Page 140 Pushbuttons The four pushbuttons let you return to favorite stations. You can set the pushbuttons for up to eight favorite stations (4 AM and 4 FM). Just: Tune in the station. Push SET. (SET appears in the VF display for a few seconds.) Within 5 seconds, push one of the four pushbuttons to store the station.
Page 141 How to Operate Your E T P AM-FM Stereo Audio Cassette System This part tells you how your ETR@ AM-FM stereo audio cassette sound system works. The Upper Knob The upper knob does these four things: It controls the volume. The VOL knob increases volume with to the right.
Page 142 TREBLE -Slide this lever up to increase the treble response. Adjust this lever to give a pleasing sound. If a station is weak and noisy, move TREBLE down to reduce the noise. PWR (Power) The PWR button turns your system on and off. This is the Dynamic Noise Reduction button.
Page 143 Clock set the clock, just: Push SET. Within 5 seconds, push ant Press and hold SEEK until the correct minute appears. To display the clock with the ignition off, push the upper knob. The time will be displayed for a few seconds. Cassette Tape Player Your tape player is built to work best with tapes that are 30 to 45 minutes long on each side.
Page 144: Cassette System
How to Operate Your ETW AM-FM Stereo Audio Cassette System with Equalizer This part tells you how your ETR@ AM-FM stereo audio cassette system with equalizer works. The Upper Knob The upper knob does these four things: It controls the volume. The VOL knob increases volume with to the right.
Page 145 PWR (Power) The PWR button turns your system on and off, AM-ST Button Push this button if you want AM stereo. (“STEREO” will be displayed when you are receiving an AM stereo station.) Cr02 Button The Cr02 button lets you set the system for the type of cassette being used. If you are using chrome or metal tapes, push the Cr02 button in.
Page 146 Clock To set the clock, just: Press SET. (SET appears in the VF display for a few seconds.) Within 5 seconds, push and hold SCAN until the correct hour appears. Press and hold SEEK until the correct minute appears. To display the clock with the ignition off, push the upper knob. The time will be displayed for a few seconds.
Page 147: Care Of Your Cassette Tape Player
Care of Your Cassette Tape Player A tape player that is not cleaned regularly can cause reduced sound quality, ruined cassettes, or a damaged mechanism. Cassette tapes should be stored in their cases away from contaminants, direct sunlight, and extreme heat. If they aren’t, they may not operate properly or cause failure of the tape player.
Page 148: How To Operate Your Etr@ Am-Fm Stereo Audio 20 Compact Disc (Cd) System
How to Operate Your E T P AM-FM Stereo Audio Compact Disc (CD) System part how your ETR' AM-FM stereo system works: This tells Upper Knob (PWR-VOL) The upper knob has three functions: It switches the radio on and off when the ignition is on. It controls the volume.
Page 149 SEEK Pressing the SEEK button will cause the receiver to seek the next higher station and stop. Pressing the 4 SEEK button will cause the receiver to seek the next lower station and stop. SCAN When you press SCAN, the radio will go to the next station and pause, and will keep scanning until you press SCAN again.
Page 150 To Play A Compact Disc (CD) NOTICE: Before you begin, please note: DO NOT use mini-discs that are called singles, They won’t eject. USE FULL-SIZE COMPACT DISCS. If the disc player is very hot, or if you’re driving on a very rough road, a disc may come out or just not play.
Page 151 SCAN Press SCAN to sample each track for approximately 10 seconds. Scanning RDM, SCAN will continue until the again. PREV If you hold the PREV (4 SEEK disc will return to previous tracks. NEXT Press NEXT (SEEK the present track finished.
Page 152 BAND and 000 will appear again. Now you are ready to enter the 8. Press last three digits of your code. 9. Repeat steps 6 and 7 for the last three digits of your code. 10. Press BAND and rEP will appear for 5 seconds and then 000 will appear.
Page 153: Care Of Your Compact Discs
Care of Your Compact Discs Handle discs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge.
Page 154 Notes 3-26...
Page 155: Your Driving And The Road
Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving..Defensive Driving Drunken Driving Control of a Vehicle .
Page 156: Defensive Driving
Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. (See “Safety Belts” in the Index.) Defensive driving really means “be ready for anything.” On city streets, rural roads, or freeways, it means “always expect the unexpected.”...
Page 157 According to the American Medical Association, a 180-pounc who drinks three 12-ounce (355 with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three LCounce (120 had 1-1/2 ounces (45 It’s the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour, the person’s BAC would be close to 0.12 percent.
Page 158 But it’s very important to keep in mind that the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night.
Page 159: Control Of A Vehicle
Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you’re driving on snow or ice, it’s easy to ask more of those control systems than the tires and road can provide.
Page 160 Avoid needless heavy braking. Some people drive in spurts - heavy acceleration followed by heavy braking traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking.
Page 161: Steering
As you brake, your computer keeps receiving updates on wheel speed and controls braking pressure accordingly. Remember: Anti-lock doesn’t change the time you need to get your foot up to the brake pedal. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.
Page 162: Steering Tips
Steering Tips Driving on Curves It’s important to take curves at a reasonable speed. A lot of the “driver lost control” accidents mentioned on the news happen on curves. Here’s why: Experienced driver or beginner, each of us is subject to the same laws of physics when driving on curves.
Page 163 An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
Page 164: Passing
Passing The driver of a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane as oncoming traffic for several seconds.
Page 165: Loss Of Control
right lane. (Remember that your right outside mirror is convex. The vehicle you just passed may seem to be farther away from you than it really is.) Try not to pass more than one vehicle at a time on two-lane roads. Reconsider before passing the next vehicle.
Page 166: Driving At Night
While driving on a surface with reduced traction, try your best sudden steering, acceleration, shifting to a lower gear). Any sudden changes could cause the tires You may not realize the surface is slippery until your vehicle is skidding. Learn to recognize warning clues - such as enough water, ice or packed snow on the road to make a “mirrored surface”...
Page 167: Driving In The Rain
Vision Night No one can see as well at night as in the daytime. But as we get older these differences increase. A 50-year-old driver may require at least twice as much light to see the same thing at night as a 20-year-old. What you do in the daytime can also affect your night vision.
Page 168 less traction. It’s always wise fall while you are driving. The surface may get wet suddenly when your reflexes are tuned for driving on dry pavement. The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road, and even people walking.
Page 169: Citydriving
Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road.
Page 170: Freeway Driving
Here are ways to increase your safety in city driving: Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 171 Just before you leave the lane, glance quickly over your shoulder to make sure there isn’t another vehicle in your “blind” spot. Once you are moving on the freeway, make certain you allow a reasonable following distance. Expect to move slightly slower at night. When you want to leave the freeway, move to the proper lane well in advance.
Page 172: Hill And Mountain Roads
Highway Hypnosis Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 173 Know how to go down hills. The most important thing let your engine do some of the slowing down. Shift to a lower gear when you go down a steep or long hill. Know how to go uphill. You may want to shift down to a lower gear. The lower gears help cool your engine and transmission, and you can climb the hill better.
Page 174: Winter Driving
Winter Driving Here are some tips for winter driving: Have your vehicle in good shape for winter. Be sure your engine coolant mix is correct. You may want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning triangles.
Page 175 What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get “wet ice” when it’s about freezing (32°F;...
Page 176 If You’re Caught in a Blizzard If you are stopped by heavy snow, you could be in a serious situation. should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow. Here are some things to do to summon help and keep yourself and your passengers safe: Turn on your hazard flashers.
Page 177: Towingatrailer
Run your engine only as long as you must. This saves fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged.
Page 178 NOTICE: Pulling a trailer improperly can damage your vehicle and result in costly repairs not covered by your warranty. To pull a trailer correctly, follow the advice in this section, and see your dealer for important information about towing a trailer with your vehicle.
Page 179 Weight of the Trailer How heavy can a trailer safely be? It depends on how you plan to use your rig. For example, speed, altitude, road grades, outside temperature and how much your vehicle is used to pull a trailer are all important. And, it can also depend on any special equipment that you have on your vehicle.
Page 180 Total Weight Be sure your vehicle’s tires are inflated to the limit for cold tires. You’ll find these numbers on the Certification label at the rear edge of the driver’s door in the or see “Tire Loading” GVW limit for your vehicle. Hitches It’s important to have the correct hitch equipment.
Page 181 Will the trailer parts take 3,000 psi (20 650 kPa) of pressure? If not, the trailer brake system must not be used with your vehicle. If everything checks out this far, then make the brake fluid tap at the port the master cylinder that sends fluid to the rear brakes.
Page 182 Following Distance Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without a trailer. This can help you avoid situations that require heavy braking and sudden turns. Passing You’ll need more passing distance up ahead when you’re towing a trailer. And, because you’re a good deal longer, you’ll need to go much farther beyond the passed vehicle before you can return to your lane.
Page 183 Parking on Hills really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured. and both your vehicle and the trailer can be damaged. But if you ever have to park your rig on a hill, here’s how to do it: 1.
Page 184 Notes 4-30...
Page 185: Problems On The Road
Problems on the Road Here you’ll find what to do about some problems that can occur on the road Hazard Warning Flasher Other Warning Devices ..........Jumpstarting .
Page 186: Hazard Warning Flasher
Hazard Warning Flashers When the hazard warning flashers are on, your turn signals won’t work. others. They also let police know you have a problem. Your front and rear turn signal lights will flash on and off. But they won’t flash if you’re braking.
Page 187: Other Warning Devices
Other Warning Devices If you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle.
Page 188 2. Get the vehicles close enough so the jumper cables can reach, sure the vehicles aren’t touching each other. If they are, it could cause a ground connection you don’t want. You wouldn’t be able to start your vehicle, and the bad grounding could damage the electrical systems. You could be injured if the vehicles roll.
Page 189 5. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged, too. Before you connect the cables, here are some basic things you should know. Positive will go to positive negative or a metal engine part.
Page 190 Good Battery Attach the cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection is just as good there, but the chance of sparks getting back to the battery is much less.
Page 191: Towingyourvehicle
Towing Your Vehicle Try to have a GM dealer or a professional towing service tow your vehicle. They can provide the right equipment and know how to tow it without damage. If your vehicle has been changed or modified since it was factory-new by adding aftermarket items like fog lamps, aero skirting, or special tires and wheels, these things can be damaged during towing.
Page 192 Don't have your vehicle towed with the wheels in contact with the ground if it has all-wheel drive. If sling-type or wheel lift equipment, then either the front or rear wheels must be supported on a dolly. If your vehicle has rear-wheel drive, don't have it towed on the rear wheels, unless you must.
Page 193 NOTICE: (Continued) Additional ramping may be required for car-carrier equipment. Use safety chains and wheel straps. If your vehicle has the all-wheel drive option, a dolly MUST be used under the rear wheels when towing from the front. Towing From the Front (Except AII-Wheel Drive) NOTICE: Do not tow with sling-type equipment or the front bumper system will be damaged.
Page 194 Towing From the Rear (Except All- Wheel Drive) NOTICE: Do not tow with sling-type equipment or the rear bumper system will be damaged. Use wheel lift or car-carrier equipment. Additional ramping may be required for car-carrier equipment. Use safety chains and wheel straps. If your vehicle has the all-wheel drive option, used under the front wheels when towing from the rear.
Page 195: Engine Overheating
Engine Overheating If Steam Is Coming From Your Enaine NOTICE: If your engine catches fire because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. 5-11...
Page 196 If No Steam Coming From Your Engine get the overheat warning but see or hear no steam, the problem may not be too serious. Sometimes the engine can get a little too hot when you: Climb a long hill on a hot day. Stop after high speed driving.
Page 197 When decide it’s safe to lift the hood, here’s what you’ll see: A. Coolant recovery tank B. Radiator pressure cap C. Engine fan If the coolant inside the coolant recovery tank is boiling, don’t do anything else until it cools down. The coolant level should be at or above FULL.
Page 198 How to Add Coolant to the Coolant Recovery Tank If you haven’t found a problem yet, but the coolant level isn’t the FULL mark, add a 50/50 and a proper antifreeze at the coolant recovery tank. (See “Engine Coolant” in the Index for more information about the proper coolant mix.) NOTICE: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts.
Page 199 How to Add Coolant to the Radiator 5-15...
Page 200 You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly to the left until it first stops. (Don't press down while turning the pressure cap.) If you hear a hiss, wait for that to stop.
Page 201 7. By this time the coolant level inside the radiator filler neck may be lower. If the level is lower, add more of the proper mix through the filler neck until the level reaches the base of the filler neck. 4.
Page 202: Engine Fan Noise
Engine Fan Noise This vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most every day driving conditions the clutch is not engaged. This improves fuel economy and reduces fan noise.
Page 203: Changing A Flat Tire
Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to Turn level place. on your hazard warning flashers. Flat Tire Blocked Tire The following steps will tell you how to use the jack and change a tire. 5-19...
Page 204 Jack Storage Your jack, extension, ratchet and wheel blocks are stored by your vehicle’s rear doors, along the passenger side wall. To remove your jack cover, take off the plastic wing nut by turning it to the left. Lift up on the latch and pull the jack cover off.
Page 205 Jacking Tool Storage 1. Nut 2. Washer 3. Wheel Blocks 4. Jack Lifthead 5. Jack 6. Jacking Instructions Tag To remove the ratchet extension by turning the wing nut to the left. Remove the wing nut and retainer and take out the ratchet and extension.
Page 206 Spare Tire Your spare tire is stored underneath your vehicle. You will use the ratchet and extension to lower the spare tire. 5-22...
Page 207 Put the flat end of the extension on an angle through the hole in the rear door frame, above the bumper. Be sure the flat end connects into the hoist shaft. Attach the ratchet, with the DOWN side facing you, to the extension.
Page 208 Changing the Tire ::..., ew::;;,. .'.,, . ! : % , % % : y ,,..., ..:... :<>,,.I .._.. :.i. w.,.:. / I : i : ..I : . : , / .
Page 209 Put your spare tire near the flat tire. Remove the wheel trim. your jack. Place the blocks at the front and rear of the tire farthest If you have an aluminum hub cap, remove it by using the flat end of the extension.
Page 210 To remove the hubcap from the brushed aluminum wheel, fit the flat end of the extension into the notch and pop the hubcap off. With DOWN facing you, use the ratchet and socket to loosen all the wheel nuts. Don’t remove them A.
Page 211 Raising your vehicle with the jack improperly positioned will damage the vehicle or may allow the vehicle to fall Be sure to fit the jack lift head into the proper location before raising your vehicle. off the jack. Raise the vehicle by rotating the ratchet to the right.
Page 212 Take off the flat tire. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. Place spare the wheel mounting surface. 5-28...
Page 213 Replace the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. Lower the vehicle by rotating the ratchet to the left. Lower the jack completely. 5-29...
Page 214 Tightening Wheel Tightening Sequence Tighten the wheel nuts firmly in a criss-cross sequence ratchet to the right with the UP marking facing you. NOTICE: Wheel covers won't fit on your compact spare. a wheel cover on your compact spare, you could damage the cover or the spare.
Page 215 Storing The Jack and Spare Tire Put the tire on the ground at the rear of the vehicle, with the valve stem pointed down. Pull the retaining bar through the center of the wheel, making sure it is properly attached. Attach the ratchet, with the extension.
Page 216: Compact Spare Tire
Compact Spare Tire Although the compact spare was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 Wa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inflated.
Page 217: If You're Stuck: In Sand, Mud. Ice Or Snow
If You’re Stuck: In Sand, Mud, Ice or Snow What you don’t want to do when your vehicle is stuck is to spin your wheels. The method known as “rocking” can help you get out when you’re stuck, but you must use caution. NOTICE: Spinning your wheels can destroy parts of your vehicle as well as the tires.
Page 218 Notes...
Page 219: Service & Appearance Care
Service & Appearance Care Here you will find information about the care of your vehicle begins with service and fuel information. and then it shows how to check important fluid and lubricant levels about your vehicle. and a section devoted to its appearance care .
Page 220: Service
Service Your GM dealer knows your vehicle best and wants you to be happy with it. We hope you’ll go to your dealer for all your service needs. You’ll get genuine GM parts and GM-trained and supported service people. We hope you’ll want to keep your GM vehicle all GM. Genuine GM parts have one of these marks: Doing Your Own Service Work If you want to do some of your own service work, you’ll want to get the...
Page 221 NOTICE: If you try to do your own service work without knowing enough about it, your vehicle could be damaged. The 8th digit of your Vehicle Identification Number (VTN) shows the code letter for your engine. You will find the VIN at the top left of your instrument panel.
Page 222 Ethanol is ethyl or grain alcohol. Properly-blended fuel that is no more than 10% ethanol is fine for your vehicle. Methanol is methyl or wood alcohol. NOTICE: Fuel that is more than 5% methanol is bad for your vehicle. Don’t use it. It can corrode metal parts in your fuel system and also damage plastic and rubber parts.
Page 223 Fuels in Foreign Countries If you plan on driving in another country outside the U.S. or Canada, unleaded fuel may be hard to find. Do not use leaded gasoline. If you use even one tankful, your emission controls won’t work well or at all. With continuous use, spark plugs can get fouled, the exhaust system can corrode, and your engine oil can deteriorate quickly.
Page 224 The fuel filler door release button is in the upper corner of the driver's side stepwell. While refueling, hang the cap inside the fuel door. To take off the cap, turn it slowly to the left (counter- clockwise).
Page 225: Checking Things Under The Hood
Be careful not to spill gasoline. Clean gasoline from painted surfaces as soon as possible. See “Cleaning the Outside of Your Vehicle” in the Index. When you put the cap back on, turn it to the right until you hear a clicking noise.
Page 226 Lift the hood, release the hood prop from its retainer and put the hood prop into the slot in the hood. Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the hood prop.
Page 227 Engine Oil It's a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. Then just pull the hood down and close it firmly.
Page 228 To Check Engine Oil Pull out the dipstick and clean it with a paper towel back in all the way. Remove it again, keeping the tip lower. When to Add Oil If the oil is at or below the ADD line, then you’ll need to add some oil. But you must use the right kind.
Page 229 What Kind of Oil to Use Beginning midyear 1993, oils of the proper quality for your vehicle will be identified with this new “starburst” symbol. The “starburst” symbol indicates that the oil has been certified by the American Petroleum Institute (API), and is preferred for use in your gasoline engine.
Page 230 You should also use the proper viscosity oil for your vehicle, as shown in the following chart: RECOMMENDED SAE VISCOSITY GRADE ENGINE OILS FOR BEST FUEL ECONOMY AND COLD STARTING, SELECT THE LOWEST SAL VISCOSITY GRADE OIL WEATHER SAE 5W-30 PREFERRED COLD WEATHER...
Page 231 If you cannot find oils with the new “starburst” symbol on the front of the container, you should look for and use oils containing the following three things: SHor SG “SH” or “SG’ must be on the oil container, either by itself or combined with other quality designations, such as “SHKD,”...
Page 232 Engine Oil Additives Don’t add anything to your oil. Your GM dealer is ready to advise if you think something should be added. When to Change Engine Oil See if any one of these is true for you: Most trips are less than 4 miles (6 It’s below freezing outside and most trips are less than 10 miles km).
Page 233: Enginecover
Engine Cover In order to replace your air cleaner filter, you will have to remove your engine cover. It is inside your vehicle behind the instrument panel extension. To Remove the Engine Cover: 1. Move both front seats as far back as they will go. 6-15 2.
Page 234 4. Grasp the bottom of the extension. Lift up and then pull out. 5. Disconnect the electrical connector for the cigarette lighter. Set the extension aside. 6. Grasp the top the heater duct and pull down gently to remove. 6- 16...
Page 235 7. Remove the bolt from the engine cover bracket. 8. Loosen the nut and move the bracket out of the way. 9. Lift up on each of the two latches at the bottom of the cover. 6-17...
Page 236 When removing the cover, be careful not to damage the instrument panel or the trim. To Install the Engine Cover: 1. Lift the engine cover into the vehicle and slide it all the way forward. Make sure the rubber seal is over the latches. 2.
Page 237: Air Cleaner
8. Grasp the bottom of the instrument panel extension and install the top into the groove first. Then, push the bottom of the extension into place. 9. Install the two nuts and two screws on the extension. Air Cleaner To Remove the Air Cleaner Filter: If you have the 4.3L engine (VIN Code Z) must first remove the engine cover before changing the filter.
Page 238: Automatic Transmission Fluid
If you have the 4.3L engine (VIN Code W) with the square air cleaner, you change the cleaner filter without removing the the hood, unsnap both clips and remove the top. After changing the filter, snap both clips to secure the air cleaner. Be sure air cleaner lid is correctly positioned to seal out dust and contaminants that are harmful to your engine.
Page 239 NOTICE: Too much or too little fluid can damage your transmission. much can mean that some of the fluid could come out and fall on hot engine parts or exhaust system, starting a fire. an accurate reading if you check your transmission fluid. Wait at least 30 minutes before checking the transmission fluid level if you have been driving: When outside temperatures are above 90°F (32...
Page 240 Then, without shutting ofithe engine, follow these steps: 3. Check both sides of the dipstick, and read the lower level. The fluid level must be in the COLD area for a cold check or cross-hatched area for a hot check. 1.
Page 241 How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See “Recommended Fluids and Lubricants” in the Index. If the fluid level is low, add only enough of the proper fluid to bring the level up to the COLD area for a cold check or the HOT area for a hot check.
Page 242: Rearaxle
Rear Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See “Scheduled Maintenance Services” in the Index. How to Check Lubricant What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use.
Page 243: Frontaxle
How to Check Lubricant What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Lubricants” in the Index. Front Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it.
Page 244: Engine Coolant
What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids Engine Coolant The following explains your cooling system and how to add coolant when it is low. If you have a problem with engine overheating, see “Engine Overheating”...
Page 245 NOTICE: If you use an improper coolant mix, your engine could overheat and be badly damaged. The repair cost wouldn’t be covered by your warranty. Too much water in the mix can freeze and crack the engine, radiator, heater core and other parts. Some conditions, such as air trapped in the cooling system, can affect the coolant level in the radiator.
Page 246 To Add Coolant Add coolant mix at the recovery tank, but be careful not to spill it. If you need more coolant, add the proper mix at the coolant recovery tank. 6-28...
Page 247 Radiator Pressure Cap NOTICE: Your radiator cap is a 15 psi (105 kPa) pressure-type cap and must be tightly installed to prevent coolant loss and possible engine damage from overheating. Be sure the arrows on the cap line up with the overflow tube on the radiator filler neck. Thermostat Engine coolant temperature is controlled by a thermostat in the engine coolant system.
Page 248 When the engine compartment is hot, the level should be at the HOT mark. When the engine compartment is cool, COLD mark. What to Add Refer to the Maintenance Schedule to determine what kind of fluid to use. See “Recommended Fluids and Lubricants’’ in the Index. Unscrew the cap and wipe the dipstick with a clean rag.
Page 249: Windshield Washer Fluid
NOTICE: When adding power steering fluid or making change, always use the proper fluid. Failure to fluid can cause leaks and damage Windshield Washer Fluid To Add NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid.
Page 250: Brake Master Cylinder
Brakes Brake Master Cylinder Your brake master cylinder is here. It is filled with DOT-3 brake fluid. There are only two reasons why the brake fluid level in your master cylinder might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear.
Page 251 To Check Brake Fluid The fluid levels should be above system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the levels are above MIN and below the top of each window. What to Add When you do need brake fluid, use only DOT-3 brake fluid - such as Delco Supreme II@ (GM...
Page 252 Brake Wear Your vehicle has front disc brakes and rear drum brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal firmly).
Page 253: Replacing Brake System Parts
Replacing Brake System Parts The braking system on a modern vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. Vehicles we design and test have top-quality GM brake parts in them, as your vehicle does when it is new.
Page 254: Fluidleakcheck
For more information on vehicle storage, contact your dealer’s service or write to: department, Adistra Corporation 17 1 Hamilton Street Plymouth, MI 48 170 In Canada, write to: General Motors of Canada, Limited Customer Services Department Oshawa, Ontario L1 J 5Z6 Fluid Leak Check After the vehicle has been parked for awhile, inspect the surface beneath the vehicle for water, oil, fuel or other fluids.
Page 255 Headlights 1 . Open the hood. 2. Remove the four screws from the headlight bezel. Pull the bezel out so you can see the parkingkurn signal sockets. Press the tab and turn the socket to the left to remove the socket from the bezel.
Page 256 7. Reverse steps 1-5 to reinstall the headlight. Front Parkingflurn Signal Lights 1. Open the hood. 2 . Remove the four screws from the headlight bezel. Pull the bezel out so you can see the parkinghum signal sockets. 5. Pull the connector out and unplug the light.
Page 257 5. Reverse steps 1-3 to reinstall the headlight. Rear Lights I . Open the rear door. 4. Pull out the bulb and replace it . . , with the new bulb. 2. Remove the two screws behind the door. 3. Pull out the taillight assembly so you can see the socket.
Page 258 6. Reverse steps 1 4 to reinstall the taillight. Center High Mounted Stop Lamp (CHMSL) 4. Press the tab and turn the socket to the left to remove the socket from the bezel. If the socket does not have a tab, turn the socket to the left to remove the socket from the...
Page 259 Other Maintenance Front Suspension and Steering Linkage Refer to the Maintenance Schedule to determine how often to lubricate the fittings and what type of lubricant to use. Front Wheel Bearing (Two-Wheel Drive) If your vehicle is two-wheel drive, it has wheel bearings that must be cleaned and repacked.
Page 260 Air Conditioning Every now and then have your dealership check your air conditioning system to be sure it has not lost any cooling ability. If you think the system is not working properly, have your dealership check it out as soon as possible.
Page 261 Door weatherstrips and rubber hood bumpers should be wiped clean with a wet cloth and lightly coated with a rubber lubricant. Never use too much of any lubricant and be sure to wipe up any extra lubricant when you are finished. Some parts that need lubricating are hard to get at.
Page 262: Loading Your Vehicle
Malfunction Indicator Lamp (SERVICE ENGINE SOON ) This light on your instrument cluster lets you know when your emission system needs service. The light will come on briefly when you start your engine to let you know that the system is working. If it does not come on when you start your engine, or if it comes on and stays on while you’re driving, your system may need service.
Page 263 And, if you do have a heavy load, you should spread it out. Using heavier suspension components to get added durability might not change your weight ratings. Ask your dealer to help you load your vehicle the right way. NOTICE: Your warranty does not cover parts or components that fail because of overloading.
Page 264 Payload The Payload Capacity is shown on the CertificationRire label. This is the maximum load capacity that your vehicle can carry. Be sure to include the weight of the people inside as part of your load. If you added any accessories or equipment after your vehicle left the factory, remember subtract the weight of these things from the payload.
Page 265: Tires
Add-on Equipment When you carry removable items, you may need to put a limit on how many people you carry inside your vehicle. Be sure to weigh your vehicle before you buy and install the new equipment. NOTICE: Your warranty doesn’t cover parts or components that fail because of overloading.
Page 266 Tire Pressure Inflation The Certificatioflire label which is on the rear edge of the driver’s door, shows the correct inflation pressures for your tires, when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than a mile.
Page 267 Tire Inspection and Rotation make your tires last longer, have them inspected and rotated at the mileages recommended in the Maintenance Schedule. See “Scheduled Maintenance Services” in the Index. If your vehicle has front tires with different load ratings or tread designs (such as all season vs.
Page 268 When It’s Time for New Tires You need a new tire i f You can see the indicators at three or more places around the tire. You can see cord or fabric showing through the tire’s rubber. The tread or sidewall is cracked, cut or snagged deep enough to show cord or fabric.
Page 269 If you ever replace your tires with those not having a TPC Spec number, make sure they are the same size, load range, speed rating and construction type (bias, bias-belted Uniform Tire Quality Grading The following information relates to the system developed by the United States National Highway Traffic Safety Administration which grades tires by treadwear, traction and temperature performance.
Page 270 Temperature A, By C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 271 Each new wheel should have the same load carrying capacity, diameter, width, offset, and be mounted the same way as the one it replaces. If you need to replace any of your wheels, wheel bolts, or wheel nuts, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, and wheel nuts for your GM model.
Page 272: Appearancecare
Tire Chains NOTICE: If your vehicle has P245/60R15 size tires, don’t use tire chains; they can damage your vehicle. If you have other size tires, use tire chains only where legal and only when you must. Use only SAE Class “S” type chains that are the proper size for your tires.
Page 273 Never use these to clean your vehicle: Gasoline Benzene Naphtha Carbon Tetrachloride Acetone They can all be hazardous damage your vehicle, too. Don’t use any of these unless this manual says you can. In many uses, these will damage your vehicle: Alcohol Laundry Soap Bleach...
Page 274 Using Foam-Type Cleaner on Fabric Vacuum and brush the area to remove any loose dirt. Always clean a whole trim panel or section. Mask su bunding trim along stitch or welt lines. Mix Multi-Purpose Powdered Cleaner following the directions on the container label.
Page 275 Fabric Protection Your vehicle has upholstery that has been treated with Scotchgard" Fabric Protector, a 3M product. Scotchgard" protects fabrics by repelling oil and water, which are the carriers of most stains. Even with this protection, you still need to clean your upholstery often to keep it looking new. Further information on cleaning is available by calling 1-800-433-3296 (in Minnesota, 1-800-642-6 167).
Page 276 Cleaning Vinyl Use warm water and a clean cloth. Rub with a clean, damp cloth to remove dirt. You may have to do it more than once. Things like tar, asphalt and shoe polish will stain if you don’t get them off quickly.
Page 277 Clean the outside of the windshield with GM Windshield Cleaner, Bon-Ami Powder@ (GM Part No. 105001 1). The windshield is clean if beads do not form when you rinse it with water. Clean the blade by wiping vigorously with a cloth soaked in full strength windshield washer solvent.
Page 278 Protecting Exterior Bright Metal Parts Bright metal parts should be cleaned regularly to keep their luster. Washing with water is all that is usually needed. However, you may use GM Chrome Polish on chrome or stainless steel trim, if necessary. Use special care with aluminum trim.
Page 279 Finish Damage Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into a major repair expense. Minor chips and scratches can be repaired with touch-up materials available from your dealer or other service outlets.
Page 280 Appearance Care Materials Chart SIZE PART NUMBER 1050172 1050173 16 oz. (0.473L) White Sidewall 1050174 32 oz. (0.946L) Vinyl 1050214 16 oz. (0.473L) Fabric Cleaner 1050244 1050427 6 lbs. (2.72 kg) Multi-Purpose 1050429 8 oz. (0.237L) 1050729 16 oz. (0.473L) Preservatone 1051055 105 1398 1052870...
Page 281: Vehicle Identification Number
Vehicle Identification Number (VIN) I l I \ l I /I1 I I l I l I I l 1 I I - TESTVNXX3XXQ09696 This is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side.
Page 282 Engine ldentification The eighth character in your VIN is the engine code. This code will help you identify your engine, specifications, and replacement parts. I I - 4 * l 6-64...
Page 283: Service Parts Identification Label
Service Parts Identification Label You’ll find this label < VEHICLE IDENTIFICATIO! ARL A02 A65 B6Y B9A 69K NUMBER K19 K64 LC3 MX1 M31 NA5 6BJ 62L 62U 67D 671 679 PAINTTECHNOLOGY It’s very helpful if you ever need to order parts. On this label is: your VIN, the model designation, paint information, and...
Page 284 Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links in the wiring itself. This greatly reduces the chance of fires caused by electrical problems.
Page 285 ruse Block To remove fuses if you don’t have a fuse extractor, hold the end of the fuse between your thumb and index finger and pull straight out. Be sure to use the correct fuse. If you ever have a problem on the road and don’t have a spare fuse, you can “borrow”...
Page 286: Capacities And Specification Charts
Capacities and Specification Charts Replacement Parts Replacement part numbers listed in this section are based on the latest information available at the time of printing, and are subject to change. If a part listed in this manual is not the same as the part used in your vehicle when it was built, or if you have any questions, please contact your GM truck dealer.
Page 287 Cooling System Capacity ENGINE VIN CODE 4.3L 4.3L *All quantities are approximate. After refill, the level MUST be checked. Crankcase Capacity ENGINE VIN CODE 4.3L 4.3L *All quantities are approximate. After refill, the level MUST be checked. Do not overfill. Fuel Tank Capacity TYPE Standard Tank...
Page 288 Lamp and Bulb Data EXTERIOR LAMPS Headlamps (Halogen) Park, Signal Lamp Tail, Stop Lamps Marker Lamps Backup Lamp License Lamp CHMSL Assembly INTERIOR LAMPS Dome Lamp (w/o Roof Console) Dome Lamp (with Roof Console) Glove Box Lamp Heater & AC Control Visor Vanity Mirror Lamps Stepwell Lamp Reading Lamp (with Roof Console)
Page 289 LAMPS General Indicator Lamp? PC74 Instrument Cluster Illum.? PC94 Headlamp Beam Indicator Lamp? PC74 Headlamp Beam Indicator Lamp$ PC161 Malfunction Indicator Lamp PC74 (Service Engine Soon)? Malfunction Indicator Lamp (Service Engine Soon)$ Directional Indicator? Directional Indicator$ Brake Warning Indicator Lamp? Brake Warning Indicator Lamp$ Transmission Indicator Dial$ Fog Lamps...
Page 290: Fuses And Circuit Breakers
Fuses Circuit Breakers 6941 SHUNT CIG LTWDM €3 HRNlTL LPS ECM 8 Fuse Legend 7.5 Amp Brown 10 Amp -Red 15 Amp Blue €3 SHUNT 1 1 1 I GAGES AUX HTR AIC TURN-BlU HTR AIC BRAKE FRONT 15 Amp 20 Amp - Yellow 25 Amp 30 Amp - Green...
Page 291 NAME PROTECTED Instrument Panel Lamps, INST LPS Radio Dial Lamps, Heater Lamps PWR ACCY Power Door Locks, Power Seat CIG LTWDM Digital Clock, Cigarette Lighter, Dome Lights, Radio Memory, Glove Box Lamp Instrument Cluster Gages, GAGES Brake Switch, Audio Alarm, Headlight Switch Illumination, Ash Tray Illumination, Cruise Control...
Page 292 NAME PROTECTED DRL** Canadian Daytime Running Lights Power Mirror MIRRORS* TRAILER* Trailer Wiring Harness *In-line fuse **Canada only ***In-line fuse (certain models) Service Replacement Part and Filter Recommendations ENGINE (VIN) OIL FILTER AIR CLEANER FILTER PCV VALVE SPARK PLUGS* FUEL FILTER RADIATOR CAP *Use copper-cored resistor type spark plugs.
Page 293 Air Conditioning Refrigerants Not all air conditioning refrigerants are the same. If the air conditioning system in your vehicle needs refrigerant, be sure the proper refrigerant is used. If you’re not sure, ask your GM dealer. For additional information, see your “Warranty and Owner Assistance Information”...
Page 294 Notes...
Page 295: Scheduled Maintenance Services
Scheduled Maintenance Services This section covers the maintenance required for your vehicle needs these services to retain its safety. dependability. and emission control performance A Word About Maintenance Your Vehicle and the Environment Scheduled Maintenance Services Selecting The Proper Maintenance Schedule Maintenance Schedule I Maintenance Schedule I1 Explanation of Scheduled Maintenance Services...
Page 296: A Word About Maintenance
A Word About Maintenance We at General Motors want to help you keep your vehicle in good working condition. But we don’t know exactly how you’ll drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather.
Page 297: Scheduled Maintenance Services
Scheduled Maintenance Services This part tells you the maintenance services you should have done and when you should schedule them. Your GM dealer knows your vehicle best and wants you to be happy with it. If you go to your dealer for all your service needs, you’ll know that GM-trained and supported service people will perform the work using genuine GM parts.
Page 298 MAINTENANCE SCHEDULE I Item An Emission Control Service ** See “Explanation of Scheduled Maintenance Services” in the Index $ The California Air Resources Board has determined that the failure maintenance item will not nullify the emission warranty or limit recall liability prior completion of vehicle useful life.
Page 299 MAlNTENANCE SCHEDULE / (continued) THE SERVICES SHOWN ON THIS CHART UP TO 60,000 MILES (100 000 km) ARE TO BE DONE AFTER 60,000 MILES AT THE SAME INTERVALS. T1002...
Page 300 MAlNTENANCE SCHEDULE I/ Miles (000) Item Service Kilometers (000) Oil Filter Change*- 12 Months, or 2 Chassis Lubrication-Every Months, Cooling System Service* -Every Months or Air Cleaner Filter Replacement* 5 Front Wheel Bearing Repack (2WD Only) 6 Transmission Service Filter 7 Fuel Plug 8 Spark...
Page 301: Explanation Of Scheduled Maintenance Services
Explanation Of Scheduled Maintenance Services Below are explanations of the services listed in the maintenance charts. The proper fluids and lubricants to use are listed whoever services your vehicle uses these. All parts should all necessary repairs done before you or anyone else drives the vehicle. ENGINE OIL AND OIL FILTER CHANGE“...
Page 302 6. TRANSMISSION SERVICE: - Change the transmission fluid and filter every 15,000 miles (25 000 km) if the vehicle is mainly driven under one or more of these conditions: In heavy city traffic. Where the outside temperature regularly reaches 90 “F (32” C) or higher.
Page 303 13. TIRE AND WHEEL ROTATION AND INSPECTION proper wear and maximum tire life, rotate tires at the first 6,000 miles (10 000 kilometers) for Schedule I or 7,500 miles (12 500 kilometers) for Schedule I1 and then every 15,000 miles (25 thereafter.
Page 304: Owner Checks And Services
Owner Checks and Services Listed below are owner checks and services which would be made at the to help time period specified and dependability your vehicle. necessary repairs are completed at Be sure or lubricants are added to your vehicle, make sure they are the proper ones, shown in this section.
Page 305 Steering Column Lock Operation - While parked, try to turn the key to LOCK in each gear shift position. The key should turn to LOCK only when the gear shift is in “P” (Park). On all vehicles, the key should come out only in LOCK. Parking Brake and Transmission Park on a fairly steep hill, with the vehicle facing downhill.
Page 306: Periodic Maintenance Inspections
Periodic Maintenance Inspections Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your GM dealer’s service department or other qualified service center do these jobs. Make sure any necessary repairs are completed at once. Steering and Suspension Inspection? and steering system for damaged, loose or missing parts, signs of wear or lack of lubrication.
Page 307: Recommended Fluids & Lubricants
Recommended Fluids & Lubricants NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained from your GM Dealer. USAGE Engine Oil Engine Coolant Hydraulic Brake Systems Parking Brake Cable Power Steering System Manual Steering Gear Automatic Transmission Differential: a.
Page 308 USAGE Hood Latch Assembly: a. Pivots and spring anchor b. Release Pawl Front Wheel Bearings Automatic Transmission Shift Linkage, Floor Shift Linkage, Hood and Door Hinges, Body Door Hinge Pins, Folding Seat, Fuel Door Hinge Key Lock Cylinders Chassis Lubrication Windshield Washer Solvent Weatherstrips Gas Line...
Page 309: Maintenancerecord
Maintenance Record After each of the preceding Scheduled Maintenance Services is performed, record the date, odometer reading, services performed (list item numbers) and who performed the services in the appropriate column. In addition, retain copies of your receipts. It is suggested that receipts Owner’s Manual.
Page 310: Service Station Checks
Service Station Checks It is important for you or a service station attendant to perform these under-hood checks at each fuel fill. Check the engine oil level and add if necessary. Check the engine coolant level and add if necessary. Check the windshield washer fluid level and add if necessary.
Page 311 Hood Release Lever See Page 6-7. Battery The Delco Freedom battery needs no water. See Page 6-35. Brake Fluid Reservoir See Page 6-32. Automatic Transmission Fluid See Page 6-20. --I! f i l Fuel Capacity 27 US. Gal. (102 L.). Use unleaded gas only.
Page 312 Notes 7- 18...
Page 313: Customer Assistance Information
Customer Assistance Information Here you will find out how to contact Chevrolet if you need assistance section also tells you how to obtain service publications and how to report any safety defects Customer Satisfaction Procedure Customer Assistance for the Hearing or Speech Impaired (TDD) GM Participation in BBB AUTO LINE .
Page 314: Customer Satisfaction Procedure
Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and Chevrolet. Normally, any concern with the sales transaction or the operation of your vehicle will be resolved by your dealer’s Sales or Service Departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 315: Customer Assistance For The Hearing Or Speech Impaired (Tdd)
General Motors reserves the right to change eligibility limitations and/or to discontinue its participation in this program. Both Chevrolet and your Chevrolet dealer are committed to making sure you are completely satisfied with your new vehicle. Our experience has...
Page 316: Reporting Safety Defects To The United States Government
AUTO LINE, but you may contact the BBB at any time. The BBB will attempt to resolve the complaint serving as an intermediary between you and Chevrolet. If this mediation is unsuccessful, an informal hearing will be scheduled where eligible customers may present their case to an impartial third-party arbitrator.
Page 317: Reporting Safety Defects To The Canadian Government
In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. Please call us at 1-800-222-1020 , or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P. 0. Box 7047 Troy, MI 48007-7047 In Canada, please call us at 1-800-263-3777 (English) (French).
Page 318: Roadside Assistance
Chevrolet Roadside Assistance Program To enhance Chevrolet's strong commitment to customer satisfaction, Chevrolet is excited to provide the services Assistance Center. 24-Hour Roadside Assistance Number Roadside Assistance is available 24 hours a day, 365 days a year, by calling 1-800-CHEV USA (1-800-243-8872).
Page 319: Courtesy Transportation
Chevrolet/Geo Courtesy Transportation Program is not part of the BUMPER TO BUMPER New Vehicle Limited Warranty. Chevrolet/Geo reserves the right to make any changes or discontinue the Courtesy Transportation Program at any time without notification. For additional program details, contact your Chevrolet/Geo dealer.
Page 320 1-800-7824356. This way you’ll get them as they become available. Individual PSP’s If you don’t want to buy all the PSP’s issued by Chevrolet for all car or truck models in the model year, you can buy individual PSP’s, such as those which may pertain to a particular model.
Page 321 The number to call is 1-800-55 1-4123. Copies at Participating Dealers Copies of Indexes and individual PSP’s are at your participating Chevrolet dealer. You can ask to see them. A VERY IMPORTANT REMINDER: These PSP’s are meant for technicians.
Page 323 <n...
Page 325: Index
Index ............AirBag Servicing Your Air Bag-Equipped Vehicle .
Page 326 Trailer Wear Indicators Braking In Emergencies ......... . . Break-In.
Page 327 Damage ............Finish .
Page 328 Exhaust System FanNoise Filter Replacement Chart Finish Care Damage Fluid Automatic Transmission Brake Capacities CoolantRecovery FrontAxle Leak Check Powersteering Radiator Rear Axle RecommendedFluids Transfercase Windshield Washer ........... . . FogLamps Four-wheel Anti-lock Frontseats...
Page 329 Hazard Warning Flashers ..........HeadRestraints Headlights High Beam Indicator Light...
Page 330 ........Loading Your Vehicle Lubrication Accelerator Control System...
Page 331 ..........Visorvanity .
Page 332 Publications Replacement Part/Filter Recommendations StationsChecks Servicing Your Facial Air Bag-Equipped Vehicle Shifting Into P (Park) Shifting Out Of P (Park) Single Belt Accessory Drive SpareTire Specification Charts Speedometer Springs. Fiberglass ....... . Starting Your Engine Steering In Emergencies...
Page 333 Vehicle Damage Warnings Identification Number Storage ..........Symbols Ventilation System AirVents...
Page 334 Notes...
Page 335 Notes...
Page 336 Notes...
Page 337 Notes...
Page 338 Notes...
Page 340 9410 WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION THROUGH National Institute for AUTOMOTIVE SERVICE EXCELLENCE...

This manual is also suitable for:

1994 astro cargo 1996 astro

Chevrolet 1994 Astro Passenger Owner's Manual

Table of Contents

Seats and Safety Belts Section

Features & Controls Section

Comfort Controls & Audio Systems Section

Your Driving and the Road Section

Problems on the Road Section

Service & Appearance Care Section

Scheduled Maintenance Services Section

Quick Links

Chapters

Related Manuals for Chevrolet 1994 Astro Passenger

Summary of Contents for Chevrolet 1994 Astro Passenger

This manual is also suitable for:

Table of Contents