Table of Contents
Advertisement
4. Remove the
screws from the
bulb retainer and
take the bulb
retainer off of the
lamp assembly.
straight out of the
socket
.
5. Pull the old bulb
6. Put in a new bulb and
push it
in until
it is
tight.
7. Replace the bulb retainer.
8. Replace the rear lamp assembly and tighten
the screws. You may want
to use a magnetic screwdriver when installing the screws.
9. Close the tailgate or rear doors.
Exhaust System
To help prevent damage to your exhaust system, do not continue to drive
your vehicle if you notice:
Engine misfiring
Loss of performance
0
Exhaust system components hanging lower than normal
Loud exhaust system noises
0
Other unusual operating conditions
Have your engine and exhaust system serviced regularly.
Three- Way Catalytic Converter (Gasoline Engines)
Your vehicle's three-way catalytic converter is designed to reduce the
pollutants in your vehicle's exhaust. Use only unleaded fuel in your vehicle.
If you use leaded fuel, you could damage your three-way catalytic converter
and other engine components.
Oxidation Catalytic Converter (Diesel Engines)
Your vehicle's oxidation catalytic converter is designed to reduce the
particulates in your vehicle's exhaust. If your vehicle's oxidation catalytic
converter ever needs to be replaced,
it
must be replaced with an oxidation
converter intended for use
with
diesel engines only.
6-53
Advertisement
Table of Contents
