Heidolph Hei-VAP Expert Operating Instructions Manual page 131

Operation
Stop chiller
–
the two options)
The settings made here are prioritized and suppress the general
parameter settings in the
Edit ramp profiles
➜
Load the desired ramp profile as described above.
➜ Switch to the parameters page (screen 3 in
twice from the start page of the loaded ramp profile on the touch panel:
➜ From the list of all process steps of the ramp profile, select all the affected lines
one after the other (highlighted in orange) and edit the values as described above
(see section "Touch the Start process button to process the ramp profile." on page
131).
– You can change several process steps at the same time.
– The designation of a modified ramp profile is marked with an asterisk (
Maintain chiller
/
Settings
133
(touch the entry to switch between
menu!
ramp profiles
mode): Swipe left
*
).