Heidolph Hei-VAP Expert Operating Instructions Manual page 115

Commissioning
Stop process: Heating bath
Menu item
In this menu, define the behavior of the heating bath heating at the end of the process.
➜ Touch the function button to switch between the two options:
Stop process: Heating bath on
–
remains switched on after the end of the process.
Stop process: Heating bath off
–
bath is automatically switched off at the end of the process.
➜
Confirm your entry with
Stop process: Chiller
Menu item
In this menu, define the behavior of the chiller at the end of the process.
➜ Touch the function button to switch between the two options:
Stop process: Chiller on
–
switched on at the end of the process.
Stop process: Chiller off
–
automatically switched off at the end of the process.
➜
Confirm your entry with
Factory settings
Menu item
In this menu, reset the device to the factory settings. All user data (parameter adjust-
ments, favourites, ramp profiles) will be deleted!
Factory settings
➜
Touch the
➜ The following prompt appears on the display:
➜
Confirm the security prompt with
must be restarted!
➜ To cancel the reset and return to the previous menu without making any changes,
Cancel
touch the
ok
.
: With this selection, the chiller remains
: With this selection, the chiller is
ok
.
function button.
ok
to restore the factory settings. The device
button.
: With this selection, the heating bath
: With this selection, the heating
117