AJAX DoubleButton User Manual page 3

Event transmission to the monitoring station
The Ajax security system can connect to the CMS and transmit alarms to the
monitoring station in
Connection
The device is not compatible with
control panels.
Before starting connection
1. Install the Ajax app
least one room.
2. Check if your hub is on and connected to the Internet (via Ethernet cable, Wi-
Fi, and/or mobile network). You can do this in the Ajax app or by looking at
the Ajax logo on the front panel of the hub. The logo should light with white
or green if the hub is connected to the network.
3. Check if the hub is not armed and does not update by reviewing its status in
the app.
Only users with administrator permissions can connect a device to a hub.
How to connect DoubleButton to a hub
1. Open the Ajax app. If your account has access to several hubs, select the
hub to which you want to connect the device.
2. Go to the Devices tab
3. Name the device, scan or enter the QR code (located on the package), select
a room and a group (if group mode is enabled).
4. Click Add — the countdown will begin.
Sur-Gard (ContactID)
ocBridge Plus uartBridge
. Create an account
and click Add device.
and SIA DC-09 protocol formats.
, , and third party security
. Add a hub to the app and create at