TGWxE1 G a te w a y S e rie s U s e r M a n u a l
Figure 5-15 White List Configuration Interface
Procedures for configuring the whitelist are as follows:
Step1
Click Add.
Step2
Enter the address allowed to access in the dialog box displayed, and click OK.
Step3
Tick off On.
T h is fu n c tio n ta k e s e ffe c t a fte r th e s y s te m re b o o ts .
T h e m a x im u m 2 0 e n trie s c a n b e a d d e d to th e w h ite lis t o n th e T G W X E 1 .
5.5.8 Media Stream
Click the label of Advanced > Media Stream to open this interface.
Figure 5-16 Media Stream Configuration Interface
Table 5-15 Media Stream Configuration Parameters
Name
Min. RTP port
Max. RTP port
5 -2 4
Description
The minimum value of UDP ports for RTP transmission and receiving, and the parameter
must be greater than or equal to 3000.
The value is recommended to be equal or greater than 10000.
Note: each phone call will occupy RTP and RTCP ports.
The maximum values of UDP ports for RTP's transmission and receiving.
It's advisable to be greater than or equal to "2× number of lines + min. RTP port".
Ta d ira n Te le c o m
Need help?
Do you have a question about the Aeonix TGW SIP-PRI Series and is the answer not in the manual?