Pressure Transducer Removal/Replacement - Halton M.A.R.V.E.L. Operator's Manual

5. Remove pressure transducer faceplate (4 screws).
6. Remove side mount screws (2 screws).
7 . Replace with Halton Part # 18028).
8. Reconnect wires and tubing as before. Check that the tubing is not kinked.
5. Remove faceplate screws (4)
6. Remove mounting screws (2)
M.A.R.V.E.L. Installation Operation & Maintenance Manual
3. Disconnect wires
4. Disconnect ¼" AL tubing
24