Inputting Letters (Label Setting) - Sony RM-NX7000 Operating Instructions Manual

Continued

Inputting letters (label setting)

The basic operations to input letters is explained here. Letters can be input in the
label (name) setting display by pressing the keyboard using the supplied Stylus.
The label setting display appears when creating a new key or changing a key
label already set. Display the label setting display by following the procedure of
each chapter. How you can change [Button1] to [MOTHER] by following the
example of "Setting the label of a Direct Access button" (page 52) is explained
here.
Delete unnecessary letters
1
by pressing the [Backspace]
key.
Move the cursor to the right of a letter
you want to delete by pressing the NEXT
button, and press the [Backspace] key.
Each time you press the [Backspace] key,
you can delete a letter from the right. For
this example, press the NEXT button 7
times, and press the [Backspace] key 7
times to delete all letters.
Press to highlight the [Caps Lock] key, then input
2
letters in the order [M], [O], [T], [H], [E] and [R].
To input capital letters:
To input symbols:
To input a space:
To start a new line:
To move the cursor:
40
Basic Operations of the Remote Commander
Press to highlight the [Caps Lock] key, then
input letters. Press the [Caps Lock] key again
to release it.
Press the [Symbol] key to display a page for
symbols. There are 4 pages of symbols. Select
a page with the [Symbol] key. If you press the
[Symbol] key in the last page for symbols, the
page returns to the normal keyboard display.
Press the [Space] key.
Press the [3] key.
Press the NEXT/BACK button on the Remote
Commander.