Using The Touch Panel Display; Calibrating The Touch Panel Display (Alignment) - Sony RM-NX7000 Operating Instructions Manual

Using the touch panel display

Calibrating the touch panel display (ALIGNMENT)

Tap the center of the
1
marks sequentially with the
supplied Stylus.
We say "tap" about pressing lightly on
the display with the Stylus.
When you tap the center of the display,
calibration of the display is complete and
the Home display appears.
Note
When calibrating, tap correctly the center of
the mark. If you do not tap the center, the
display in step 1 appears repeatedly until the
calibration is correctly performed.
z Tip
To calibrate the display again, see "Calibrating the touch panel display (ALIGNMENT)"
(page 212).
16
m
m