Sony RM-NX7000 Operating Instructions Manual page 189

6
Press the Zapping element whose
macro you want to check.
The macro procedure is shown.
About checking the macro procedure
When a function key is programmed as a
step, the key appears where the key is
assigned in the display. When a function
button is programmed, its name appears in
the center of the display.
When showing is complete, the display
returns to step 6.
Note
The macro procedures of the [JUMP] key and the [DELAY] key are not displayed.
To manually check the programmed macro procedure in order
Press the [PAUSE] key to suspend showing. Press the [PAUSE] key again to resume
consecutive showing.
While consecutive showing is suspended, press the NEXT button to show the next macro
step and press the BACK button to show the previous step.
189