Sony RM-NX7000 Operating Instructions Manual page 53

3 Press the tag of a Direct
Access button you want to
set the label to.
For example, set the label by pressing the
[Button1] tag.
Note
You cannot select a tag, even if you press a
Direct Access button on the Remote
Commander.
Press the [LABEL] key.
4
The software keyboard appears in the
display.
Set the label of the Direct
5
Access button.
For inputting letters to the label, see
"Inputting letters (label setting)" (pages
40 - 41).
Specified settings to the label of the
Direct Access button besides the
information described on pages 40 - 41
are as follows.
Letter input:
Starting a new line:
Pictographs:
[SIZE]:
[ALIGN]:
[COLOR]:
[Label]:
Tags of the Direct Access buttons
Up to 8 letters can be input.
Not available.
Can be input. A pictograph is counted as 4 letters.
Not selectable. The letter size is fixed to [Small].
Not selectable. The letter location is fixed to
[Center].
Select a letter color of your preference.
Available.
Continued
53