Sony RM-NX7000 Operating Instructions Manual page 15

Charging without using the Battery charging stand
Connect the AC power adaptor directly to the DC IN jack of the Remote
Commander. You can operate the Remote Commander while charging it.
Notes
• After starting up, charging continues. Do not disconnect the AC power adaptor until
charging is complete and be disappears.
• While starting up (while the "NAVITUS" logo is displayed), do not disconnect the AC
power adaptor, as it may cause a malfunction.
• After charging starts, it takes a maximum of about 8 hours to complete charging.
z Tips
• If you charge the Remote Commander frequently, charging time will be reduced.
•When be is not shown in the display, charging is not necessary.
15