Sony RM-NX7000 Operating Instructions Manual page 30

Continued
For Windows 98 Second Edition users
1
Close all software running on Windows.
2
Insert the supplied CD-ROM in the CD-ROM drive of the computer.
After a moment, "InstallShield Wizard" of "NAVITUS Design" appears.
3
Click [Cancel] to close "InstallShield Wizard" of "NAVITUS Design."
4
Connect a computer and the Remote Commander using the
supplied USB cable.
The "Found New Hardware" message appears. After a moment, "Add New
Hardware Wizard" appears.
5
Click [Next].
The display for selecting the search method
of a driver appears.
6
Select "Search for the best driver for
your device. [Recommended]", then
click [Next].
The display for specifying a driver location
appears.
30
Setting up the Remote Commander using "NAVITUS Design"