Sony RM-NX7000 Operating Instructions Manual page 75

Press a Component key whose skin (key
4
appearance and color) and label you want to set.
The display for the skin setting appears.
z Tip
If you press the Direct Access button, you cannot set the skin. In this case, go to
the label setting in step 6.
Select a skin for the Component key from the
5
provided skins.
Set two kinds of skin: a skin that appears released (normal skin) and then
a skin that appears pressed (pressed skin).
1 Select a normal skin to be set.
Only one skin appears in the center of
the display. To display the next skin,
press the NEXT button on the Remote
Commander. To display the previous
skin, press the BACK button.
2 Press the [OK] key.
3 Select a pressed skin to be set.
Only one skin appears in the center of
the display. To display the next skin,
press the NEXT button on the Remote
Commander. To display the previous
skin, press the BACK button.
4 Press the [OK] key.
Component keys
Labels for the Direct Access buttons
Press the Direct Access button to select it.
Normal skin
Pressed skin
m
Continued
75