Sony RM-NX7000 Operating Instructions Manual page 54

Continued
When the label setting is
6
complete, press the [OK]
key.
The label setting of the Direct Access
button is confirmed and the display
returns to step 3.
z Tip
If you press the [CANCEL] key, the label will
not be set and the display will return to step 3.
To finish all settings, press the COMMANDER OFF
7
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
54
Using the Direct Access button (DIRECT ACCESS)