Sony RM-NX7000 Operating Instructions Manual page 117

Note
Make sure to set the label to a new key. The label will not be set when no letters
are input even if you press the [OK] key.
,
Go on to "Step 2: Setting a macro" (page 120).
2 When programming a macro for an existing function
key/button
Select a function key/button you want to program a macro for.
z Tip
You can also program a macro for an Empty key/button having no setting.
For example, select a function key/button a macro is to be programmed for
in the DVD component.
Press the [SET] key for 2 seconds or longer in the
1
Home display.
The Set display appears.
Press the [COMPONENT EDIT] key.
2
The Component edit display appears.
Press the [SYSTEM MACRO]
3
key.
Press a Component key that
4
includes the function key/
button you want to
program a macro for.
For example, press the [DVD] key.
Continued
117