ADEEPT PiCar-Pro Manual page 56

displayed in your browser to understand their functions and usage.
2.4 Basic module
Basic modules can be found in almost all products. These modules are used to
control the core functions of robot products. At this time, only the camera can work,
and other functions can only be realized after PiCarPro is installed.
2.4.1 Vedio module
Showing the screen captured by the camera. Depending on the product type, the
window rendering method may be different, and some products can also interact with
this window.
2.4.2 Hard wave module
Displaying the hardware information of the robot product.
53