ADEEPT PiCar-Pro Manual page 24

the path of the uncompressed .img file all English letters without special
characters.
Method two:
Manually downloading the image file we provide and write it to the SD card (not
recommended).
The image downloaded according to the method one is the latest official version
of Raspbian and comes with some pre-installed software. At the same time, the
normal operation of the robot product requires many other dependent libraries,
although we provide a script to install these simple methods of relying on libraries
(will be introduced in detail later), occasionally encountering dependent library
updates may cause the installation of dependent libraries to fail, so we provide a
Raspbian mirror file pre-installed with dependent libraries. The disadvantage of this
method is that the mirror files and related dependent libraries we provide cannot be
kept updated at any time. Only when you encounter a very difficult problem, you can
try this method to solve it.Download the Raspbian image file address we provide:
https://www.adeept.com/learn/detail-50.html
After the download is complete, decompress it. The path of the
decompressed .img file must be all English letters and no special characters.
1.3 Burning the downloaded Raspberry Pi system to
the SD card
We recommend using the Raspberry Pi Imager tool officially provided by the
21