Table of Contents
Advertisement
The DC Hipot line offered by Phenix Technologies is ruggedly built and suitable for field or lab use. Designed
to test electrical switchgear, cables, motors, generators and protective equipment, DC testing is popular
because the equipment is more compact and lighter in weight than comparable AC equipment
Design and Safety Features
Output voltage continuously adjustable to 120kV DC.
"Zero Start" voltage interlock and external safety interlock.
Leakage current measurements available from .01 to 10,000 microamps DC.
Removable line cord.
Rotary switch selection simplifies operation.
Integrated cable storage bin in controls.
Built in discharge circuit rated at 12 kilojoules.
Light weight, portable, with controls enclosed in rugged, high-density polyethylene case.
Adjustable overcurrent trip point from 10%-110% of each range.
Large, easy to read LCD meters
Input Circuit Breaker / Power Switch
Thermal resettable overload protecting high voltage transformer primary circuits.
Very low ripple, <2% RMS ripple at full output. (>40 Meg Resistive)
For detailed specifications, see Section 1-1.
DCD 4120-10
INTRODUCTION
.
Advertisement
Table of Contents
