Totalization; Add Up "Number Of Parts - KERN CIB Operating Manual

9 Totalization

The balance is equipped with a sum memory used for adding up of identical counted
parts to total quantity and total weight.
9.1

Add up "Number of parts"

Place a reference weight which should
correspond to a certain number of parts
and enter the number of parts via the
numeric keys
confirm with .
The reference weight, the piece weight and the number of parts are displayed.
Remove the reference weight and for the
first totalization place a number of parts
and press . „r01" is shortly
displayed, followed by the weight, the
piece weight and the number of parts.
The [ ] display next to "M+" indicates
the stored value.
Remove the parts and place the parts of
the second count, then press
„r02" is shortly displayed, followed by the
weight, the piece weight and the number
of parts of the second weighing.
Weigh-in more parts as specified. Please note that the balance must be unloaded
between the individual weighing procedures.
This process can be repeated up to 99 times or until the weighing range of the
balance is exhausted.
CIB-BA-e-2010
to and
.
(example)
↓
(example)
(example)
29