Taring; Determination Of The Tare Weight By Weighing - KERN CIB Operating Manual

8 Taring

The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.

8.1 Determination of the tare weight by weighing

Place empty tare container on the
weighing plate. The total weight of the
container is displayed.
Press
After dead stop control was carried out,
the display is reset to "0". The weight of
the container is now internally saved.
The zero display and the arrow next to
the symbol are displayed.
Fill weighing goods into the container and read the weight.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value, unload the weighing plate and then
press the TARE key; the [ ] display next to the
disappears.
• The taring process can be repeated any number of times. The limit is
reached when the whole weighing range is exhausted.
CIB-BA-e-2010
(example)
symbol
27